3-27
FRONT FORK OIL SEAL AND DUST SEAL CLEANING/
FRONT FORK INTERNAL PRESSURE RELIEVING/
FRONT FORK REBOUND DAMPING FORCE ADJUSTMENT
INSP
ADJ
EC36D001
FRONT FORK OIL SEAL AND DUST SEAL
CLEANING
1. Remove:
9
Protector
9
Dust seal
1
NOTE:
Use a thin screw driver, and be careful not to
damage the inner fork tube and dust seal.
2. Clean:
9
Dust seal
a
9
Oil seal
b
NOTE:
9
Clean the dust seal and oil seal after every run.
9
Apply the lithium soap base grease on the in-
ner tube.
EC36H002
FRONT FORK REBOUND DAMPING FORCE
ADJUSTMENT
1. Adjust:
9
Rebound damping force
By turning the adjuster
1
.
Stiffer
a
a
→
Increase the rebound damping
force. (Turn the adjuster
1
1
in.)
Softer
b
b
→
Decrease the rebound
damping force. (Turn the
adjuster
1
1
out.)
EC36f000
FRONT FORK INTERNAL PRESSURE
RELIEVING
NOTE:
If the front fork initial movement feels stiff during
a run, relieve the front fork internal pressure.
1. Elevate the front wheel by placing a suitable
stand under the engine.
2. Remove the air bleed screw
1
and release
the internal pressure from the front fork.
3. Install:
9
Air bleed screw
1 Nm (0.1 m•kg, 0.7 ft•lb)
Summary of Contents for YZ125(R)/LC
Page 128: ...3 3 INSP ADJ MEMO...
Page 286: ...4 37 ENG CLUTCH AND PRIMARY DRIVEN GEAR 4 Install 9Plain washer 1 9Circlip 2...
Page 566: ...TUN MEMO...
Page 567: ......