Wetrok DISCOMATIC SAMBA XT, Operating Instructions Manual

Page: 40 / 141

39
1
3
4
2
5
3A
3C
3B
EN
Commissioning
Fill up fresh water tank with
water and chemicals.
Adjust fresh water dosing
(normal 45° / maximal if horizontally).
Lower suction nozzle.
Press main switch.
Switch on water.
(illuminates only when operating
lever is activated).
Position pole correctly using the
lower right lever. Recommended
tilt approx. 45°.
Start machine by pressing and
holding left or right operating
lever.
Switch on suction turbine.
• When machine is stopped, the brush set must be switched off immediately to prevent any damage to floor coverings.
• Attach brushes, pads and other accessories only as directed by the illustrated operating manual.
Machine in motion and moving parts
• The drive motion and the vicinity of rotating brushes/pads pose a risk of injury.
• Do not grasp brush/pads or wheels with your hands or place your feet in this zone.
• Do not allow machine to come into contact with items of clothing, jewellery or hair.
• Ensure that no cables, ropes or similar are picked up and reeled in by the running brush unit.
5.2 During operation