Wetrok DISCOMATIC SAMBA XT, Operating Instructions Manual

Page: 38 / 141

37
EN
Emergencies:
• Apply First Aid immediately or summon help.
• ON/OFF Press switch.
• After any incidents, do not reactivate the machine until manufacturer has inspected the machine.
2 GENERAL
The machine is designed in line with current technology and in conformity with recognised safety regulations. It has undergone inspection
of electrical systems and conforms to European safety standards (CE). It has various circuit breakers that act as protection systems. Hazards
can nevertheless arise, chiefly through improper use or infringements of safety regulations and instructions set out in the operating manual.
We reserve the right at any time to make technical modifications to the machine as well as to consumables and accessories. For this reason,
discrepancies may exist between certain details on the machine and what is set down in the operating manual.
• This machine is designed for industrial floor cleaning of hard floor coverings in interior
areas in due consideration of this operating manual.
• Only use consumables and accessories recommended by the manufacturer.
Only original brushes and pad plates may be used.
• Safety regulations relating to operation and maintenance are set out in the relevant chapters,
and adherence to these regulations is mandatory!
• It is forbidden to operate the machine if it is technically unsound or if the following
safety regulations and hazards information are disregarded.
• Protective guards must not be dismantled nor bypassed.
• Conversions and modifications to the product are not permitted without the manufacturer’s authorisation.
• Where damage occurs resulting from disregarding this operating manual as well as improper treatment or using the machine other than
for its intended purpose, then warranty will be voided. No liability will be accepted for consequential damage.
• The machine must not be used in the open air in wet conditions or stored under such conditions.
The machine must not be used for the following purposes because of the associated hazards:
• as a towing vehicle, means of transport, or toy.
• for cleaning textile floor coverings (the exception to this is single-disc machines designed for this purpose with the proper accessories).
The machine must not be used for the following purposes because of the associated hazards:
• for absorption or removal of dust that is harmful to health and of combustible materials.
• for vacuum cleaning of flammable, toxic, corrosive, irritating, radioactive materials or materials harmful to health.
• for cleaning of floors near flammable or explosive substances.
• The maximum 2 % rise/incline limit for transportation and during operation must not be overstepped.
After use, the machine must be secured against rolling away.
• Air humidity during operation must be between 30-95 %.
• Vibration level is below 2.5 m/s2.
• Noise emission is below 74 dB A.
3 TECHNICAL IMPROVEMENTS
4 PROPER USE
4.1 Improper use
4.2 Types of dust and liquids that are potentially harmful to health
4.3 Limiting values