W&H Osstell Beacon, User Manual

Page: 27 / 313

25087-03 GB
11
Recommended Cleaners:
Isopropyl alcohol
Low foaming, neutral pH, enzymatic detergents like:
Medizime LF
Enzol
Do not use:
Acidic or phenolic based cleaners/disinfectants.
Strong alkali detergent of any type, including hand soaps and dish soaps
Bleach based cleaners
Hydrogen Peroxide based cleaners
Abrasive cleaners
Acetone of hydrocarbon based cleaners
MEK (Methyl Ethyl Ketone)
Birex
Gluteraldehyde
Quaternary Ammonium Chloride salt-based cleaners
The instrument does not require regular maintenance. In the event of
an instrument malfunction, contact the local sales representative or
distributor for further instructions.
SmartPegs:
Delivered sterile. The SmartPegs are disposable and
should only be used for one or multiple
measurements at one treatment session, for a single
patient only (to avoid cross-contamination).
TestPeg:
Is not used intra-orally, does not require sterilization.
The Smartpeg Mount should be cleaned and sterilized before each use
according to the instructions below.
SmartPeg Mount:
Must be autoclaved according to the recom-
mended sterilization method, validated to sterility assurance levels
(SAL), according to ISO 17665-1 and ISO 17664. The SmartPeg Mount
should be placed in suitable packaging for the sterilization process.
Sterilization Exposure Exposure
Method: temperature time
Pre-vacuum 132 °C (270 °F) 4 min
Pre-vacuum 134 °C (273 °F) 3 min
Gravity 134 °C (273 °F) 10 min
Warnings: do not exceed 135 °C (275 °F). Drying time: 30 minutes
Carefully inspect the Smartpeg Mount for damage or wear. Hand
wash the Smartpeg Mount using a neutral instrument detergent.
Rinse and dry; carefully inspect the Smartpeg Mount for damage
and wear. Sterilize the Smartpeg Mount according to the autoclave
manufacturer´s instructions. Do not wash in dishwasher.
Store sterile goods dust-free and dry.