Tektronix 372, User Manual, Page: 246 / 364

Floppy Disk System
Reference
3Ć134
Saving Settings, Curves and Programs
CAUTION
Before saving a file, always make sure that no file with same base name and
extension exists in the current working directory. If a file with same base
name and extension (data type) already exists, saving the new information
erases the contents previously stored, and replaces it with new data without
displaying any warning message.
To save settings, curves or programs:
ăStep 1:ă Touch the [SAVE] soft button to bring up the SAVE popĆup
menu.
SAVE Soft Button
Type Selection Box
NAME Selector
Figure 3Ć62:ăSAVE PopĆup Menu
ăStep 2:ă Select the data type to be saved by touching appropriate box in
the TYPE selection box. A file extension is determined automatically
according to the selected data type as shown in Table 3Ć44.
TableĂ3Ć44:ăTYPE Selection
Choices Data Type File Extension
SETUP Settings .SET
CURVE Curves .DAT
PROG Program (see 372ĆBased ProgramĆ
ming)
.PRG
ăStep 3:ă With the [NAME] selector, enter a file base name of up to eight
characters with the character keypad popĆup menu. A file extension is
automatically determined as described above.