Suzuki GRAND VITARA JB416, Service Manual

Page: 186 / 474

3C-69 Transfer: Motor-Shift Type (Transfer with Shift Actuator)
• Connect terminal “1” of transfer actuator (3) to the
positive of battery (4) and terminal “2” to the negative,
and confirm cam (2) rotates in the direction of A. At
the same time, connect terminal “2” of transfer
actuator (3) to the positive and terminal “1” to the
negative, and confirm it rotates in the direction of B. If
it doesn’t operate correctly, replace transfer actuator
assembly.
NOTE
• Do not rotate transfer actuator applying
voltage, while transfer actuator removed
from transfer control cover assembly (1).
• Do not apply voltage of the battery in the
direction of rotation limit at rotation limit
position of transfer actuator.
• Operate the motor, and measure the resistance
between following terminals of transfer actuator when
matching transfer actuator (1) to 4H-lock position and
4L-lock position.
If measured value is out of specification, replace
transfer actuator.
Transfer actuator resistance
1
2
1 3 5
4 2
4
3
A B
I5JB0A331059-01
Transfer position Terminal Resistance
4H-lock 4 – 5
385 – 400
Ω
4L-lock 3 – 4
[A]: 4H-lock position
[B]: 4L-lock position
2. Cam
3. Shift fork pin
[A] [B]
3 3
2 2
1
2
1
2
3 5
4
I5JB0A331060-02