Suzuki GRAND VITARA JB416, Service Manual

Page: 234 / 474

4E-11 ABS:
DTC Check
S5JB0E4504004
1) Turn ignition switch to OFF position.
2) Connect SUZUKI scan tool to data link connector
(1).
Special tool
(A): SUZUKI scan tool
3) Turn ignition switch to ON position.
4) Read DTC according to instructions displayed on
SUZUKI scan tool and print it or write it down. Refer
to SUZUKI scan tool operator’s manual for further
details.
NOTE
If SUZUKI scan tool can not communicate
ABS (ESP
®
) hydraulic unit / control module,
perform “Serial Data Link Circuit Check: ”.
5) After completing the check, turn ignition switch off
and disconnect SUZUKI scan tool from DLC.
DTC Table
S5JB0E4504005
CAUTION
!
Be sure to perform “ABS Check: ” before
starting diagnosis.
(A)
1
I5JB0A450008-01
DTC (displayed on
SUZUKI scan tool)
Diagnostic Items
NO DTC Normal
)
C1015
G sensor circuit failure (for 4WD
vehicle)
)
C1021 RF
Wheel speed sensor circuit
)
C1025 LF
)
C1031 RR
)
C1035 LR
)
C1022 RF
Wheel speed sensor or
encoder failure
)
C1026 LF
)
C1032 RR
)
C1036 LR
)
C1041
RF
Inlet solenoid valve circuit
failure
)
C1042
Outlet solenoid valve circuit
failure
)
C1045
LF
Inlet solenoid valve circuit
failure
)
C1046
Outlet solenoid valve circuit
failure
)
C1051
RR
Inlet solenoid valve circuit
failure
)
C1052
Outlet solenoid valve circuit
failure
)
C1055
LR
Inlet solenoid valve circuit
failure
)
C1056
Outlet solenoid valve circuit
failure
)
C1057
ABS (ESP
®
) control module power
supply circuit failure
)
C1061
Pump motor and/or motor driver
circuit failure
)
C1063
Solenoid valve power supply driver
circuit failure
)
C1071
ABS (ESP
®
) control module
internal defect
)
U1073
Control Module Communication
Bus Off
)
U1100
Lost Communication with ECM
(Reception error)