Suzuki GRAND VITARA JB416, Service Manual

Page: 278 / 474

4F-15 Electronic Stability Program:
)
C1071
ESP
®
(ABS) control
module internal defect
ESP
®
(ABS) control module internal
defect is detected.
{ { {
)
C1073
Lost communication with
yaw rate / G sensor
assembly CAN line communication error in
ESP
®
control module and yaw rate /
G sensor assembly is detected.
*2 —
{
)
C1075
Steering angle sensor
calibration incomplete *4 Missing steering angle sensor
calibration point data is detected.
— — —
)
C1076
Master cylinder pressure
sensor calibration
incomplete
Master cylinder pressure sensor
calibration is incompleted.
— —
{
)
C1077
Longitudinal G sensor in
yaw rate / G sensor
assembly calibration
incomplete
Longitudinal G sensor in yaw rate / G
sensor assembly calibration is
incompleted. (for 4WD vehicle)
{
—
{
)
C1078
Lateral G sensor in yaw rate
/ G sensor assembly
calibration incomplete Lateral G sensor in yaw rate / G
sensor assembly calibration is
incompleted.
— —
{
)
C1090
ECM detect rolling counter
failure from ESP
®
control
module
ESP
®
control module rolling counter
failure is detected by ECM.
— —
{
)
C1091
ECM data in CAN line
failure ECM sent invalid signal to ESP
®
control module.
— —
{
)
C1092
TCM data in CAN line
failure TCM sent invalid signal to ESP
®
control module. (for A/T model)
)
C1093
4WD control module data in
CAN line failure
4WD control module sent invalid
signal to ESP
®
control module. (if
equipped 4WD control module)
)
U1073
Control module
communication bus off
Transmission error that is
inconsistent between transmission
data and transmission monitor (CAN
bus monitor) data is detected more
than 7 times continuously.
— —
{
)
U1100
Lost communication with
ECM (reception error) ECM message data is missing from
CAN communication.
— —
{
)
U1101
Lost communication with
TCM (reception error) TCM message data is missing from
CAN communication. (for A/T model)
)
U1126
Lost communication with
steering angle sensor
(reception error)
Steering angle sensor message data
is missing from CAN communication.
)
U1139
Lost communication with
4WD control module
(reception error) 4WD control module message data
is missing from CAN communication.
(if equipped 4WD control module)
)
U1140
Lost communication with
BCM (reception error) BCM message data is missing from
CAN communication.
DTC
(displayed
on SUZUKI
scan tool)
Diagnostic Items
Detecting condition (DTC will be
set when detecting)
ABS
warning
lamp
EBD
warning
lamp
ESP
®
warning
lamp