Suzuki GRAND VITARA JB416, Service Manual

Page: 223 / 474

Front Brakes: 4B-3
3) Remove disc by using 8 mm bolts (1) (2 pcs). Installation
1) Install disc to wheel hub.
2) Install caliper assembly to steering knuckle.
3) Tighten caliper carrier bolts (1) to specification.
Tightening torque
Caliper carrier bolt (a): 85 N·m (8.5 kgf-m, 61.5
lb-ft)
4) Install wheel and lower vehicle.
5) Tighten wheel nuts to specified torque.
Tightening torque
Wheel nut: 100 N·m (10.0 kgf-m, 72.5 lb-ft)
6) Upon completion of installation, perform brake test.
Specifications
Tightening Torque Specifications
S5JB0E4207001
Reference:
For the tightening torque of fastener not specified in this section, refer to “Fastener Information: in Section 0A in
related manual”.
IYSQ01420025-01
1,(a)
I5JB0A420011-01
Fastening part
Tightening torque
Note
N
⋅
m kgf-m lb-ft
Caliper pin bolt 36 3.6 26.0
)
/
)
Wheel nut 100 10.0 72.5
)
/
)
/
)
Flexible hose joint bolt 23 2.3 17.0
)
Caliper carrier bolt 85 8.5 61.5
)