Suzuki GRAND VITARA JB416, Service Manual

Page: 349 / 474

Automatic Transmission/Transaxle: 5A-30
Connector “E92”
Terminal Wire color Circuit
Standard
voltage
Condition
1 BLK/ORN Ground 0 – 1 V Ignition switch ON
2 BRN/RED
Pressure control
solenoid valve (–)
0.6 – 1.0 V Ignition switch ON
3 PPL/WHT
TCC pressure control
solenoid valve (–)
0.6 – 1.0 V Ignition switch ON
4 YEL/RED
Pressure control
solenoid valve (+)
*0 – 0.6 V
↑↓
10 – 14 V
(“Reference
Waveform
No. 1: ”)
Engine running at idling.
(Output signal is duty pulse. Duty ratio varies
depending on throttle valve opening.)
5 GRN/YEL
TCC pressure control
solenoid valve (+)
*0 – 0.6 V
↑↓
10 – 14 V
(“Reference
Waveform
No. 2: ”)
Engine running at idling.
(Output signal is duty pulse. Duty ratio varies
depending on torque converter clutch operating
condition.)
6 BLK/WHT Power source 10 – 14 V Ignition switch ON
7 WHT
CAN communication
line (Low)
*2.5 – 3.6 V
↑↓
1.6 – 2.5 V
(“Reference
Waveform
No. 3: ”)
Engine running at idling with after warming up.
(CAN communication signal is pulse. Pulse signal
frequency varies depending on engine condition.))
8 — — — —
9 — — — —
10 YEL/BLK 3 position switch (–) 0 – 1 V Ignition switch ON
11 YEL/BLK
Transmission fluid
temperature sensor (+) 2.9 – 3.1 V Ignition switch ON, fluid temperature is 20
°
C (68
°
F)
0.3 – 0.5 V Ignition switch ON, fluid temperature is 100
°
C (212
°
F)
12 ORN
Transmission fluid
temperature sensor (–)
0 – 1 V Ignition switch ON
13 — — — —
14 — — — —
15 GRN/RED
Shift solenoid valve-B
(No.2)
9 – 14 V Ignition switch ON, select lever in “P” range
16 GRN
Shift solenoid valve-A
(No.1)
9 – 14 V Ignition switch ON, select lever in “P” range
17 RED
CAN communication
line (High)
*2.5 – 3.6 V
↑↓
1.6 – 2.5 V
(“Reference
Waveform
No. 3: ”)
Engine running at idling with after warming up.
(CAN communication signal is pulse. Pulse signal
frequency varies depending on engine condition.)
18 — — — —
19 — — — —
20 YEL/RED 3 position switch (+)
2.4 – 4.3 V
Ignition switch ON, select lever in “P”, “R”, “N” or “D”
range
0.8 – 2.4 V Ignition switch ON, select lever in “3”, “2” or “L” range
21 — — — —
22 — — — —
23 BLK Ground 0 – 1 V Ignition switch ON
24 WHT
Power source for back-
up
10 – 14 V Constantly