Suzuki GRAND VITARA JB416, Service Manual

Page: 198 / 474

3C-81 Transfer: Non-Shift Type (Transfer without Shift Actuator)
5) Remove rear case bolts (1), and then separate
center case (2) using special tool.
Special tool
(A): 09912–34510
6) Remove knock pin (1) and oil pipe (2) from center
case (4) and remove front oil seal No.1 (3) using flat
end rod or the like, if necessary.
7) Remove needle bearing (1) from center case (2)
using special tool, if necessary.
Special tool
(A): 09913–76010
8) Remove needle bearing (1), snap ring (2), washer
(3) and shim(s) (4) from rear output shaft (5).
9) Remove reduction shift sleeve (1) and center
differential (3) from rear output shaft (2).
10) Remove needle bearings (1), front drive shaft (2)
and thrust needle bearing (4) from rear output shaft
(3).
11) Remove differential lock clutch sleeve (1) from rear
output shaft (2).
1
I5JB0A331087-01
2
(A)
I5JB0A331016-02
1
2
3
4
I5JB0A331017-01
(A)
1
2
I5JB0A331088-01
1
2
3
4 5
I5JB0A331089-01
1
3
2
I5JB0A331090-02
1
1
2
3
4
I5JB0A331041-02
1
2
I5JB0A331022-01