Suzuki GRAND VITARA JB416, Service Manual

Page: 266 / 474

4F-3 Electronic Stability Program:
• When no abnormality is detected (the system is in
good condition), ABS warning lamp, EBD warning
lamp, ESP
®
warning lamp, SLIP indicator lamp and
ESP
®
OFF lamp turn OFF after 2 seconds.
• When an abnormality in the system is detected, some
of ABS warning lamp, EBD warning lamp (brake
warning lamp), ESP
®
warning lamp, SLIP indicator
lamp and/or ESP
®
OFF lamp are turned ON and the
area where that abnormality lies is stored in the
memory in ESP
®
control module.
Fail-Safe Mode
When ESP
®
control module detects abnormality, the
system goes into fail-safe mode. And some of functions
of ABS, TCS, stability control system are shut down. For
details of fail safe mode, refer to “Fail-Safe Table: ”.
Warning Lamp, Indicator Lamp Description
S5JB0E4601003
There are five types of warning lamp and indicator lamp in instrument cluster, which are controlled by ESP
®
control
module. They give warning / indication to driver by changing the modes light ON / blinking / light OFF.
The followings are the condition and operation of warning lamps and indicator lamps.
3
2
1
4 5
I6JB01460002-02
1. ESP
®
warning lamp 3. ABS warning lamp 5. ESP
®
OFF lamp
2. EBD warning lamp (brake warning lamp) 4. SLIP indicator lamp
1
2
3
4 5
I6JB01460003-02
Warning lamp / Indicator lamp Condition and operation
ABS warning lamp If ABS has abnormality, the lamp turns “ON”.
EBD warning lamp (brake warning
lamp) • If EBD system has abnormality, the lamp turns “ON”.
• If bake fluid level in reservoir is lower than minimum level, the lamp turns “ON”.
• Parking brake switch is ON, the lamp turns “ON”.
ESP
®
warning lamp If ESP
®
systems has abnormality, the lamp turns “ON”.
SLIP indicator lamp • If stability control system and traction control system is active, the lamp blinks
at 5 Hz.
• If Steering angle sensor calibration is incompleted, the lamp blinks at 1 Hz.