manualshive.com logo in svg

Suzuki GRAND VITARA JB416, Service Manual

The Suzuki Grand Vitara JB416 is a versatile SUV known for its reliable performance and rugged design. Whether you need routine maintenance or more extensive repairs, our Service Manual is available for free download at manualshive.com. Keep your vehicle in top condition with our comprehensive manual.

Share
Download
background image

Table of Contents 9-iii

Headlight Aiming Adjustment with Screen ...........9B-*
Headlight Switch (in Lighting Switch) 

Removal and Installation....................................9B-*

Headlight Switch (in Lighting Switch) 

Inspection.......................................................... 9B-4

Headlight Relay Inspection ................................. 9B-5

Hazard Warning Switch Removal and 

Installation ..........................................................9B-*

Hazard Warning Switch Inspection ......................9B-*
Stop (Brake) Lamp Switch Inspection ..................9B-*
Turn Signal Light Switch (in Lighting Switch) 

Removal and Installation....................................9B-*

Turn Signal Light Switch (in Lighting 

Switch) Inspection ............................................. 9B-6

Turn Signal and Hazard Warning Relay 

Removal and Installation....................................9B-*

Turn Signal and Hazard Warning Relay 

Inspection...........................................................9B-*

License Lamp Assembly Removal and 

Installation ..........................................................9B-*

Front Fog Light Assembly Removal and 

Installation (If Equipped) ....................................9B-*

Front Fog Light Bulb Replacement (If 

Equipped)...........................................................9B-*

Front Fog Light Switch Inspection (If 

Equipped)...........................................................9B-*

Front Fog Light Relay Inspection (If 

Equipped)...........................................................9B-*

Front Fog Light Aiming Adjustment with 

Screen (If Equipped) ..........................................9B-*

Headlight Manual Leveling Switch 

Inspection (If Equipped) .................................... 9B-6

Headlight Leveling Actuator Inspection (If 

Equipped)...........................................................9B-*

Rear Fog Light Switch Inspection (If 

Equipped)...........................................................9B-*

Height Sensor Removal and Installation (If 

Equipped)...........................................................9B-*

Height Sensor and Its Circuit Inspection (If 

Equipped)...........................................................9B-*

Headlight Leveling Control Module 

Removal and Installation (If Equipped) ..............9B-*

Initialization of Auto Leveling Headlight 

System ...............................................................9B-*

Illumination Cancel Switch Inspection (If 

Equipped).......................................................... 9B-6

Auto-On Headlight Sensor Inspection (If 

Equipped)...........................................................9B-*

Instrumentation / Driver Info. / Horn ...... 9C-1

Precautions........................................................... 9C-*

Precautions in Diagnosing Troubles for 

Combination Meter............................................ 9C-*

General Description .............................................9C-1

CAN Communication System Description...........9C-1

Schematic and Routing Diagram........................9C-3

Combination Meter Circuit Diagram ....................9C-3

Component Location ........................................... 9C-*

Audio System Component Location.................... 9C-*

Diagnostic Information and Procedures ............9C-4

Speedometer Symptom Diagnosis......................9C-4
Tachometer Symptom Diagnosis ........................9C-4

Engine Coolant Temperature (ECT) Meter 

Symptom Diagnosis .......................................... 9C-*

Fuel Meter Symptom Diagnosis .......................... 9C-*

Low Fuel Warning Light Symptom 

Diagnosis ..........................................................9C-5

Oil Pressure Warning Light Symptom 

Diagnosis .......................................................... 9C-*

Brake and Parking Brake Warning Light 

Symptom Diagnosis .......................................... 9C-*

Seat Belt Reminder Light Symptom 

Diagnosis (If Equipped).....................................9C-5

Illumination Indicator Symptom Diagnosis .......... 9C-*
Headlight Auto Leveling Indicator Symptom 

Diagnosis (If Equipped)..................................... 9C-*

A/T Power Mode Indicator Symptom Diagnosis 

(A/T Model Only) ............................................... 9C-*

A/T Shift Position Indicator (A/T Model 

Only) Symptom Diagnosis................................. 9C-*

Charge Warning Light Symptom Diagnosis ........ 9C-*
Main Beam (High Beam) Indicator 

Symptom Diagnosis .......................................... 9C-*

Warning Buzzer Circuit Symptom Diagnosis ......9C-6

Cigarette Lighter Symptom Diagnosis (If 

Equipped).......................................................... 9C-*

Horn Symptom Diagnosis ................................... 9C-*

Information Display Symptom Diagnosis (If 

Equipped)..........................................................9C-7

Audio System Symptom Diagnosis (If 

Equipped).......................................................... 9C-*

Remote Audio Control Switch Symptom 

Diagnosis (If Equipped)..................................... 9C-*

Navigation Symptom Diagnosis (If 

Equipped).......................................................... 9C-*

Repair Instructions ..............................................9C-8

Ignition Switch Removal and Installation............. 9C-*

Ignition Switch Inspection....................................9C-8

Combination Meter Removal and 

Installation ......................................................... 9C-*

Fuel Level Sensor Removal and Installation.......9C-8
Fuel Level Sensor Inspection..............................9C-8

Oil Pressure Switch Removal and 

Installation ......................................................... 9C-*

Oil Pressure Switch Inspection ........................... 9C-*
Engine Coolant Temperature (ECT) 

Sensor Inspection ............................................. 9C-*

Brake Fluid Level Switch Inspection ................... 9C-*
Parking Brake Switch Inspection......................... 9C-*
Door Switch (Front / Rear / Rear End Door) 

Inspection.......................................................... 9C-*

Outside Air Temperature Sensor Removal 

and Installation (If Equipped) ............................ 9C-*

Outside Air Temperature Sensor Inspection 

(If Equipped)...................................................... 9C-*

Instrument Panel Removal and Installation......... 9C-*
Information Display (Clock) Removal and 

Installation ......................................................... 9C-*

Audio Unit Removal and Installation ................... 9C-*

Summary of Contents for GRAND VITARA JB416



























































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for GRAND VITARA JB416

Eaton Green Motion DC 22 Training preview
Green Motion DC 22
Brand: Eaton Pages: 65
Yamaha Yamaha Rhino 660 Instruction Supplement preview
Yamaha Rhino 660
Brand: Yamaha Pages: 3
NavLinkz CAM-N-CV133-V Manual preview
CAM-N-CV133-V
Brand: NavLinkz Pages: 4
Tesla V2 SUPERCHARGER First Responder'S Manual preview
V2 SUPERCHARGER
Brand: Tesla Pages: 9
Napoli NPL-TV 7874 DIGITAL Instruction Manual preview
NPL-TV 7874 DIGITAL
Brand: Napoli Pages: 20
AccuAir AA-4397 Installation Manual preview
AA-4397
Brand: AccuAir Pages: 40
Peak PKC0RG Owner'S Manual preview
PKC0RG
Brand: Peak Pages: 10
Alpine eX-10 Owner'S Manual preview
eX-10
Brand: Alpine Pages: 69
Allen Sports S302 Instructions preview
S302
Brand: Allen Sports Pages: 2
Ford Focus ST 2018 Supplement Manual preview
Focus ST 2018
Brand: Ford Pages: 38
walser 30968 User Instructions preview
30968
Brand: walser Pages: 24
Cadillac 1999 DeVille Owner'S Manual preview
1999 DeVille
Brand: Cadillac Pages: 368
Luverne 205760 Installation Instructions preview
205760
Brand: Luverne Pages: 3
Navman B2+ User Manual preview
B2+
Brand: Navman Pages: 27
VDO RUDDER ANGLE INDICATOR Installation Instructions Manual preview
RUDDER ANGLE INDICATOR
Brand: VDO Pages: 8
Chevrolet 1996 Cavalier Owner'S Manual preview
1996 Cavalier
Brand: Chevrolet Pages: 372
AEM 30-3500 Instruction Manual preview
30-3500
Brand: AEM Pages: 27
Yakima K1249 Instructions Manual preview
K1249
Brand: Yakima Pages: 9

Brands by name

Popular brands

Load more brands