Suzuki GRAND VITARA JB416, Service Manual

Page: 118 / 474

3C-1 Transfer: Motor-Shift Type (Transfer with Shift Actuator)
Transfer
Motor-Shift Type (Transfer with Shift Actuator)
Precautions
Transfer Warning
S5JB0E3310001
WARNING
!
This transfer has a center differential.
When testing with 2-wheel chassis
dynamometer or speedometer tester (which
tester roller is driven by vehicle wheels), be
sure to make the vehicle as rear wheel drive
or as front wheel drive temporarily as
follows.
Otherwise, front wheels drive rear wheels or
vise-versa and personal injury may result.
1) Remove front propeller shaft or rear propeller shaft
referring to “Propeller Shaft Removal and
Installation: in Section 3D in related manual”.
2) Install special tool (cap) to flange yoke cover hole
(front or rear) of transfer (1) and fix it to transfer or
hook with string to prevent oil leakage from transfer.
Special tool
(A): 09928–36510
3) Pour specified oil into transfer up to lever plug hole if
front propeller shaft is removed.
4) Shift transfer to 4H-lock position as follows.
• Non-shift type (Transfer without shift actuator)
– Remove lever bolt (1) on transfer, push down
lever to 4H-lock position (2) and fix lever with
bolt.
• Motor-shift type (Transfer with shift actuator)
– Shift transfer to 4H-lock position by turning
transfer switch.
Precautions in Diagnosing Trouble
S5JB0E3310002
• Do not disconnect the following parts before
confirming diagnostic information (DTC, etc.) stored in
4WD control module memory. These actions will
erase memorized information in 4WD control module
memory.
– Disconnection of coupler from 4WD control module
– Disconnection of battery cable from battery
– Disconnection of ground wire harness of 4WD
control module
– Disconnect main fuse from fuse box
• Diagnostic information stored in 4WD control module
memory can be cleared as well as checked by using
SUZUKI scan tool. Before using scan tool, read its
Operator’s (Instruction) Manual carefully to have good
understanding as to what functions are available and
how to use it.
• Be sure to read “Precautions for Electrical Circuit
Service:” before inspection and observe what is
written there.
(A)
1
I5JB0A331107-03
2
1
I5JB0A331108-01