Suzuki GRAND VITARA JB416, Service Manual

Page: 139 / 474

Transfer: Motor-Shift Type (Transfer with Shift Actuator) 3C-22
Scan Tool Data
S5JB0E3314009
Scan Tool Data Definitions
S5JB0E3314010
Vehicle Speed (KM/H, MPH):
This parameter indicates vehicle speed calculated
by 4WD control module.
Actuator Pos Sen (Transfer shift actuator motor
position switch) (4H / 4H-lock / 4L-lock / N / 4H-
lock-4H / 4H-N / N-4L-lock):
This parameter indicates transfer shift actuator
motor position switch status detected by 4WD
control module.
Actuator motor Pos (Transfer shift actuator motor
position) (4H / 4H-lock / 4L-lock / N):
This parameter indicates transfer shift actuator
motor position detected by 4WD control module
using transfer shift actuator motor position.
Battery voltage (V):
This parameter indicates battery voltage detected by
4WD control module.
4L / N switch (ON / OFF):
This parameter indicates 4L / N switch status
detected by 4WD control module.
Center diff lock Sw (ON / OFF):
This parameter indicates center differential lock
switch status detected by 4WD control module.
N range signal (AT) (ON / OFF):
This parameter indicates A/T shift position (“N” range
or not) detected by 4WD control module.
CPP switch (Clutch pedal position switch) (MT) (ON /
OFF):
This parameter indicates clutch pedal position switch
status detected by 4WD control module using CPP
switch.
Mode switch 1 (Transfer switch) (ON / OFF):
ON: Transfer switch to N position.
OFF: Transfer switch to other than N position.
Mode switch 2 (Transfer switch) (ON / OFF):
ON: Transfer switch to other than 4L-lock position.
OFF: Transfer switch to 4L-lock position.
Scan Tool Data Vehicle Condition
Normal Condition /
Reference Value
Vehicle speed At vehicle stop 0 km/h, 0 mph
Actuator Pos Sen
Transfer shifted to 4H position 4H
Transfer being shifted between 4H-lock and 4H position 4H-lock – 4H
Transfer shifted to 4H-lock position 4H-lock
Transfer being shifted between 4H and N position 4H – N
Transfer shifted to 4L-lock position 4L-lock
Transfer being shifted between N and 4L-lock position N – 4L-lock
Transfer shifted to N position N
Actuator motor Pos
Transfer shifted to 4H position 4H
Transfer shifted to 4H-lock position 4H-lock
Transfer shifted to 4L-lock position 4L-lock
Transfer shifted to N position N
Battery voltage Ignition switch ON and engine stop 10 – 14 V
4L/N switch
Transfer shifted to 4L-lock or N position ON
Transfer shifted to 4H or 4H-lock position OFF
Center diff lock SW
Transfer shifted to 4H or N position ON
Transfer shifted to 4H-lock or 4L-lock position OFF
N range signal (AT)
A/T shifted to “N” range ON
A/T shifted to other than “N” range OFF
CPP switch (MT)
Clutch pedal depressed OFF
Clutch pedal released ON
Mode switch 1
Transfer switch selected to N position ON
Transfer switch selected to 4H, 4H-lock or 4L-lock position OFF
Mode switch 2
Transfer switch selected to 4H, 4H-lock or N position ON
Transfer switch selected to 4L-lock position OFF
Mode switch 3
Transfer switch selected to 4H-lock or 4L-lock position ON
Transfer switch selected to 4H or N position OFF
Warning buzzer
Buzzer not being sound OFF
Transfer shifted to N Position N Pos
Transfer shifted to disagreement of transfer switch and transfer
position
Error
ABS active
ABS operating ON
ABS not operating OFF
ESP
®
active
ESP
®
operating ON
ESP
®
not operating OFF