Suzuki GRAND VITARA JB416, Service Manual

Page: 74 / 474

1A-56 Engine General Information and Diagnosis:
E23-50
BLU/
ORN Throttle actuator
control relay output
0 – 1 V Ignition switch turned ON. —
E23-51
BLU/
YEL
Ground for
accelerator pedal
position (APP)
sensor (sub)
Below 0.3 V Ignition switch turned ON. —
E23-52
BLU/
GRN
Accelerator pedal
position (APP)
sensor (sub) signal
0.30 – 0.44 V
Ignition switch turned ON
and accelerator pedal at
idle position after warmed
up engine.
—
1.74 – 2.17 V
Ignition switch turned ON
and accelerator pedal at
full depressed position
after warmed up engine.
E23-53
ORN/
BLU
Output for 5 V
power source of
accelerator pedal
position (APP)
sensor (sub)
4.5 – 5.5 V Ignition switch turned ON. —
E23-54 ORN
Ground for
accelerator pedal
position (APP)
sensor (main)
Below 0.3 V Ignition switch turned ON. —
E23-55
WHT/
BLU
Accelerator pedal
position (APP)
sensor (main)
signal
0.65 – 0.82 V
Ignition switch turned ON
and accelerator pedal at
idle position after warmed
up engine.
—
3.50 – 4.27 V
Ignition switch turned ON
and accelerator pedal at
full depressed position
after warmed up engine.
E23-56 WHT
Output for 5 V
power source of
accelerator pedal
position (APP)
sensor (main)
4.5 – 5.5 V Ignition switch turned ON. —
E23-57 — — — — —
E23-58 — — — — —
E23-59 — — — — —
E23-60 BLU
Main power supply
relay output 10 – 14 V Ignition switch turned OFF.
—
0 – 2 V Ignition switch turned ON.
Terminal
No.
Wire
color
Circuit Normal voltage Condition Remarks