Suzuki GRAND VITARA JB416, Service Manual

Page: 370 / 474

6B-4 Steering Wheel and Column:
3) Connect all connectors that have been removed in
“Removal”.
4) Install steering column upper cover (2) and lower
cover (3), and then tighten steering column cover
screws (1).
CAUTION
!
When installing lower cover (3) and upper
cover (2), be careful so that each lead wire is
not caught between covers.
5) Install steering column hole cover (1).
6) Install steering wheel to steering column. Refer to
“Steering Wheel Removal and Installation: in related
manual”.
Steering Angle Sensor Removal and Installation
S5JB0E6206014
Removal
1) Remove steering wheel and contact coil cable
assembly. Refer to “Steering Wheel Removal and
Installation: in related manual” and “Contact Coil
Cable Assembly Removal and Installation: ”.
2) Remove steering angle sensor (2) from contact coil
cable assembly (3) while opening fitting parts (1) of
contact coil cable assembly.
Installation
1) Install steering angle sensor (2) by fitting
engagement parts (1) of contact coil cable assembly
to claws of steering angle sensor as shown in figure.
2) Install contact coil cable assembly and steering
wheel. Refer to “Contact Coil Cable Assembly
Removal and Installation: ” and “Steering Wheel
Removal and Installation: in related manual”.
Steering Angle Sensor Inspection
S5JB0E6206015
Refer to “Steering Angle Sensor Inspection: in Section
4F”.
*: Standard screw
**: Tapping screw
1*
3
1**
2
I5JB0A620015-01
1
I5JB0A620011-01
1
1
2
3
I6JB01620003-01
1
1
2
I6JB01620004-01