4F-11 Electronic Stability Program:
Customer questionnaire (Example)
Problem symptom confirmation
If symptom in “Customer Questionnaire” is found or reproduced in the vehicle, confirm the symptom is problem or not.
(This step should be done with the customer if possible.) Check warning lamps related to brake system referring to
“EBD Warning Lamp (Brake Warning Lamp) Check: in Section 4E”, “ABS Warning Lamp Check: in Section 4E” and
“ESP
DTC check, record and clearance
Perform “DTC Check: ” procedure, record it and then clear it referring to “DTC Clearance: ”.
Recheck DTC referring to “DTC Check: ”.
When DTC which is recorded at DTC check procedure is detected again after performing DTC clearance, go to “Step
4: ESP
Check: ” to proceed the diagnosis.
When DTC which is recorded at DTC check procedure is not indicated anymore after performing DTC clearance,
ESP
®
control module does not perform the system diagnosis, or temporary abnormality may occur, therefore go to
“Step 2: Driving Test: ” to proceed the diagnosis.
I6JB01460011-02
Summary of Contents for GRAND VITARA JB416
