Stanford Research Systems RGA100, Operating Manual And Programming Reference

Page: 344 / 362

Vacuum References
SRS-Vacuum Technology References
25
28. R. Baptist et. al. ,””Bayard-Alpert vacuum Gauge with microtips”” J. Vac. Sci.
Technol. B14(3) (1996) 2119
29. Peacock, R. N. et. al. , JVST A9(3) (1991) 1977, ““Comparison of hot cathode and
cold cathode ionization gauges””.
30. Beeck, U. et. al. , JVST 9 (1971) 126 , ““Comparison of the pressure indication of a
Bayard-Alpert and an Extractor Gauge””.
31. H. Akimichi, K. Takeuchi, and Y. Tuzi and I. Arakawa, ““Long term behavior of an
axial-symmetric transmission gauge””, J. Vac. Sci. Technol. A17 (1999) 2021.
32. Vic Comello, R&D Magazine, May 1999, p. 57, ““Simplify Rough Pumping With a
Wide Range Gauge””
33. H. Saeki and T. Momose, ““Vacuum gauge self-compensating external environment in
the Spring-8 storage ring””, J. Vac. Sci. Technol. A 18(1) (2000) 244
34. Edelmann, Chr.; Iwert, Th.; Kauert, R.; Knapp, W., ““ Some studies of the axial
emission ionization gauge according to Chen and Suen””, Journal of the Vacuum
Society of Japan 37 (1994) 9, 686-691
35. Kieler, O.F.O.; Biehl, St.; Kauert, R.; Knapp, W., Edelmann, Chr. ““Theoretical and
experimental desorption investigations at ionization gauges””, Vacuum, Vol. 47
(1996), No. 4, 351-355
36. Edelmann, Chr.; Kauert, R.; Kieler, O.F.O., ““On some Improvements of Ionization
Gauges of the extractor Type for the Measurement of Extreme High Vacuum””,
Journal of Vacuum Society of Japan Vol. 39, No. 4 (1996), 149-158
37. Kauert, R.;Kieler, O F O; Biehl, St; Knapp, W, Edelmann, Chr., Wilfert, St. ““
Numerical investigations of hot cathode ionization gauges””, Vacuum 51 (1998) 53
38. R. Kauert, S. Wilfert, C. Edelmann, ““Bayard-Alpert gauge with additional ion
collector for pressure measurements from 10
-9
-10
1
mbar””, Vacuum 57(3) (2000) 283-
293.
39. Gerardo Brucker, ““Improvements Coming in Ion Gauge Controllers””, R&D
Magazine, July 2000, p.41. Note: Use this article as a guide when trying to choose a
new ion gauge controller for your vacuum lab.
40. R&D Magazine, ““Gauge Controller Has Many Unexpected Features””, August 2000,
p. 45. Note: R&D Magazine product exclusive describing the features of the IGC100
controller.
41. Miertusova J. , ““Reliability and accuracy of total and partial pressure measurements
in the UHV pressure range under real experimental conditions”” , Vacuum 51 (1998)
61.
42. U. Beech and G. Reich, ““Comparison of the Pressure Indication of a Bayard-Alpert
and an Extractor Gauge””, J. Vac. Sci. Technol. 9(1) (1971) 126.