Stanford Research Systems RGA100, Operating Manual And Programming Reference

Page: 94 / 362

5-16 Display Modes
SRS Residual Gas Analyzer
Display Modes
Note:
For detailed information and command description of the RGA program please refer to the RGA
On-Line Help files provided with the program disks. The RGA help system includes detailed
description of all the features, procedures and commands available in the program.
Changing Display Modes
A display mode presents the user with a specific way to analyze the RGA data acquired.
The RGA program has several display modes including a combination of those modes
(split modes).
To change the present display mode to any other mode do the following:
1. Stop the scan if one is in progress.
2. Select the desired display from the Mode menu or click on one of the mode buttons
in the Toolbar.
Note:
Changing display modes will not affect the displayed data on the screen of the
previous mode. When the previous display mode is called back, the last scan data
will be shown.
Running in Split Display Mode
Running in split display mode allows you to view scan data in two different formats or to
scan two different sections of the mass spectrum with different scan parameter settings.
The following is a list of all the split display modes available:
• Analog split with: Analog, Table, P vs T, and Library
•
Histogram split with: Histogram, Table, P vs T, and Library
•
Table split with : Analog, Histogram, P vs T, and Library
•
P vs T split with : Analog, Histogram, Table, and Library
You cannot split with Leak Test or Annunciator modes
to split a graph do the following:
1. Make sure you are running in any of the Analog, Histogram, Table, or P vs T single
graph modes.
2. Select any of the enabled graph modes from the Split Submenu of the Mode menu
Manual Scaling of Graphs
Manual scaling applies to graphs with both X- and Y-Axis.
To manually scale a graph do the following: