Stanford Research Systems RGA100, Operating Manual And Programming Reference

Page: 337 / 362

18 Vacuum References
SRS-Vacuum Technology References
32. Donald Mattox, ““Cleaning with CO
2
””, Vacuum Technology and Coating, March
2003, p.62.
33. Y. Saito, et. al., ““Outgassing measurements of stacked laminations for use as
electromagnet core””, J. Vac. Sci. Technol. A 22(5)(2004) 2206.
34. Hans H. Funke, Jianlong Yao, and Mark W. Raynora), ““Trace moisture emissions
from heated metal surfaces in hydrogen service””, J. Vac. Sci. Technol. A 22(2)
(2004) 437.
Vacuum Pumps
1. M. H. Hablanian, J. Vac. Sci. Technol. A12(4) (1994) 897, ““Throughput type pumps
and ultrahigh vacuum””
2. Kimo H. Welch, J. Vac. Sci. Technol. A12(4) (1994) 915, ““Some important
developments in capture pumping technology in the last 40 years””
3. R&D Magazine, February 1995, p. 55, ““Dry Mechanical Vacuum Pumps For Almost
Any Application””
4. Vic Comello, R&D Magazine, October 1996, p. 41, ““Turbodrag Pumps Offer
Improved Throughput and Light Gas Compression””
5. Baliga J., Semiconductor International, October 1997, p. 86, ““Vacuum Pump Designs
Adjust to Harsher Conditions””
6. Vic Comello, R&D Magazine, June 1998, p. 79, ““Why Hybrid Turbos Are Often
Preferred””
7. Vic Comello, R&D Magazine, February 1999, p. 63, ““ Choosing a Diaphragm Pump
for a Turbo””
8. Vic Comello, R&D Magazine, February 1998, p. 81, ““ Exhausting Process Gases
Safely and Efficiently””.
9. Roberto Giannantonio, et. al. , R&D Magazine, February 1998, p. 83, ““Better Getters
Help Vacuum Pumps Work Faster””
10. Eckhard Bez, Solid State Technology, March 1999, p. S3, ““ Advances in Oil Free
Vacuum Pumps””.
11. Eckhard Bez, VACUUM and THINFILM, June 1999, p. 30 , ““Oil Sealed Vacuum
Pumps. Reducing Energy Consumption””
12. Phil Danielson, VACUUM and THINFILM, July 1999, p. 8, ““Backstreaming from
Oil-sealed Pumps””
13. S. Nesterov, J. Vasiliev, L.C.Wagner and M. Boiarski, ““Hydrogen Pumping
simulation for cryopumps””, J. Vac. Sci. Technol. A 17(4) (1999) 2099