Stanford Research Systems RGA100, Operating Manual And Programming Reference

Page: 343 / 362

24 Vacuum References
SRS-Vacuum Technology References
12. Filipelli AS. R., JVST A14(5) (1996) 2953, ““Influence of envelope geometry on the
sensitivity of ““nude”” ionization gauges””
13. Suginuma S. et. al. , ““Dependence of sensitivity coefficient of a nude type Bayard-
Alpert Gauge on the diameter of an envelope””, Vacuum 53 (1999) 177-180.
14. Charles Morrison, ““Safety Hazard from gas discharge interactions with the Bayard-
alpert ionization gauge””, J. Vac. Sci. Technol. A 3(5) (1985) 2032
15. N. T. Peacock, ““Measurement of x-ray currents in Bayard-Alpert type gauges””, J.
Vac. Sci. Technol. A 10(4) (1992) 2674
16. B. R. F. Kendall, ““Ionization gauge errors at low pressures””, J. Vac. Sci. Technol.
A17(4) (1999) 2041
17. B. R. F. Kendall and E. Drubetsky, ““Stable Cancellation of x-ray errors in B-A
gauges””, J. Vac. Sci. Technol A 16(3) (1998) 1163
18. Tilford, C. ,JVST A13(2) (1995) 485, ““Comments on the stability of Bayard-Alpert
ionization Gauges””. Note : Great information on the long-term stability of commercial
B-A gauge sensitivities. Useful recommendations on gauge operation.
19. R. N. Peacock and N. T. Peacock, ““Sensitivity variation of Bayard-Alpert Gauges
with and without closed grids from 10
-4
to 1 Pa””, J. Vac. Sci. Technol. A(8) (1990)
3341
20. Bills, D. G., JVST A12(2) (1994) 574, ““Causes of nonstability and
nonreproducibility in widely used Bayard-Alpert ionization gauges””.
21. S. D. Woods and C. R. Tilford, ““Long-term stability of two types of hot cathode
ionization gauges””, J. Vac. Sci. Technol. A3 (3) (1985) 542
22. P. C. Arnold et. al. ““Non-stable behavior of widely used ionization gauges””, J. Vac.
Sci. Technol. A 12(2) (1994) 568
23. Tilford, C. et. al. , JVST 20 (1982) 1140, ““Performance characteristics of a broad
range ionization gauge tube””.
24. K. Jousten and P. Rohl, ““Instability of the spatial electron current distribution in hot
cathode ionization gauges as a source of sensitivity changes””, J. Vac. Sci. Technol. A
13(4) (1995) 2266
25. Arnold, P. C. et. al. ,JVST A12(2) (1994) 580, ““Stable and reproducible Bayard-
Alpert ionization gauge””.(Note: The birth of Granville Phillip’’s Stabil-Ion Gauge)
26. Siska, P. E. Rev. Sci. Instrum. 68(4) (1997) 1902, ““Partial Rejuvenation of B-A
ionization gauge tubes””.
27. Cox. M. C. et. al., JVST A14(5) (1996) 2963 , ““Filament Replacement for nude
Bayard Alpert Ionization gauges””.