Stanford Research Systems RGA100, Operating Manual And Programming Reference

Page: 293 / 362

8 Appendix D
SRS Residual Gas Analyzer
Examples
The development kit provides three examples of how to use the operations layer. Each example is an
application that performs a common RGA scanning mode (table, analog, and histogram). It is likely that
your custom application can be created simply modifying one of these examples.
Simple Table
Try the example:
Open LabVIEW
Select the RGA LabVIEW Library
Open the Simple Table example, SRSRGAa Simple Table
From the front panel of the VI, set the COM port that the RGA is using
For each channel, set the noise floor , mass, and electron multiplier state
Run the VI