Stanford Research Systems RGA100, Operating Manual And Programming Reference

Page: 333 / 362

14 Vacuum References
SRS-Vacuum Technology References
51. Phil Danielson, ““How to Use the Q= S P Vacuum Relationship””, R&D Magazine,
March 2001, p. 33.
52. Donald Mattox, ““Safety Aspects of Vacuum Processing””, Vacuum Technology and
Coating, March 2001, p. 22.
53. Gerardo Brucker, ““Prevention is Key to Vacuum System Safety””, R&D Magazine,
Feb. 2001, p.57.
54. Kimo Welch, ““All-Metal Vacuum Seals””, Vacuum Technology and Coating, May
2001, p. 6; also ““More on all-metal seals””, Vacuum Technology and Coating, June
2001, p. 12.
55. Donald Mattox, ““Steady State and Transient Conductance””, Vacuum Technology and
Coating, June 2001, p. 20.
56. Lawrence Lamont Jr., ““Thin Film PVD and strategies for optimized UHV-XHV
pumping””, Solid State Teghnology, July 2001, p. 81
57. Ray Dubois and James Mayer, ““Safety Solutions for High Pressure Gas Cylinders””,
Solid State Technology, July 2001, p. 153.
58. M. Mapes. ““Summary of Quick Disconnect vacuum flanges””, J. Vac. Sci. Technol.
A19(4) (2001) 1693.
59. Phil Danielson, ““Molecular Flux Provides Process Understanding””, R&D Mag.,
August 2001, p.65.
60. Phil Danielson, ““Vacuum Envelope Penetration””, R&D Magazine, September 2001,
p. 82.
61. John Baxter, ““Gas Delivery Systems Undergo Radical Design Modifcations””, R&D
Magazine, Oct. 2001, p. 36
62. Ping Li, ““Dynamic Sealing Using ““Ferrofluidic””, Vacuum Technology and Coating,
Novmber 2001, p. 32
63. S. Kurokouchi, et. al., ““Characteristics of a Taper seal type gasket for the Conflat
Sealing System””, J. Vac. Sci. Technol., A 19(6) (2001) 2963. Note: A novel way to
sela Conflats . Worth checking out and keeping in mind.
64. Amara Rozgus, ““Vacuum Users Think Outside the Box””, R&D Magazine, Oct. 2002,
p. 26.
65. Paul LaMarche and Bob Langley, ““Movement in Vacuum””, Vacuum Technology and
coating, Nov. 2002, p. 26.Note: Information on vacuum compatible actuated devices.
66. P. LaMarche and Bob Langley, ““Vacuum Vessel Fabrication””, Vacuum technology
and Coating, Jan 2003, p. 26.