Siemens RUGGEDCOM ROX II, User Manual

Page: 106 / 798

Chapter 4
Device Management
RUGGEDCOM ROX II
CLI User Guide
60 Viewing the Slot Status
SLOT DETECTED MODULE STATE STRING UPTIME
START DATE TIME
---------------------------------------------------------------------------------------------------------------------------
pm1 none empty ---- N/A
2017-01-12Z 03:19:16Z
lm1 none empty ---- 0D 0hr 0min 0sec
2017-01-11Z 10:22:45Z
lm2 none empty ---- 0D 0hr 0min 0sec
2017-01-11Z 10:25:15Z
lm3 16x 10/100TX RJ45 operating Normal 1D 6hr 28min 46sec
2017-01-11Z 10:25:14Z
cm RX5000 Control Module operating Normal 1D 6hr 33min 12sec
2017-01-12Z 03:19:16Z
sm SM 8 Gigabit Layer 2 w/ 2x 10/100/1000TX RJ45 operating Normal 1D 6hr 28min 46sec
2017-01-11Z 10:25:16Z
lm4 8x 100FX SFP operating Normal 1D 6hr 28min 45sec
2017-01-11Z 10:25:13Z
lm5 none empty ---- 0D 0hr 0min 0sec
2017-01-11Z 10:22:45Z
lm6 none empty ---- 0D 0hr 0min 0sec
2017-01-11Z 10:22:45Z
pm2 Power 88-300VDC or 85-264VAC w/ screw terminal block operating Normal N/A
2017-01-12Z 03:19:16Z
em none empty ---- N/A
2017-01-12Z 03:19:16Z
This table or list provides the following information:
Parameter Description
slot Synopsis: { { --- }{ pm1, pm2, main }{ sm, lm1, lm2, lm3, lm4, lm5, lm6, swport, eth,
serport, celport, wlanport }{ cm, em }{ trnk } }
The slot name, as marked on the silkscreen across the top of the chassis.
detected-module Synopsis: A string 1 to 60 characters long
The installed module's type specifier.
This parameter is mandatory.
state Synopsis: { unknown, empty, disabled, resetting, operating, failed, disconnected }
The current state of the installed module.
This parameter is mandatory.
status-string Synopsis: A string
The runtime status of the installed module.
This parameter is mandatory.
uptime Synopsis: A string
The total time elapsed since the start-up of the installed module.
This parameter is mandatory.
start-date Synopsis: A string
The date on which the installed module was started up.
This parameter is mandatory.
start-time Synopsis: A string
The time at which the installed module was started up.
This parameter is mandatory.