Siemens RUGGEDCOM ROX II, User Manual

Page: 83 / 798

RUGGEDCOM ROX II
CLI User Guide
Chapter 2
Using RUGGEDCOM ROX II
File Commands 37
Parameter Description
standard_config.txt 100% 7673
7.5KB/s 00:00
file
scp-config-to-url current-
filename user
@
host
:/
path
/
new-
filename
Securely copies a configuration file from the device to a remote computer. The remote
computer must have an SCP or SSH (secure shell) service or client installed and running.
To use this command, the user credentials for the remote computer, the IP address or host
name of the remote computer, the directory path to the configuration file on the remote
computer, and the configuration file filename must all be known.
Type the command in the following format:
file scp-config-to-url current-filename user @ host :/ path / new-
filename
Where:
•
current-filename
is the current filename of the configuration file.
•
user
is a user name with access rights to the remote computer.
•
host
is the host name or IP address of the remote computer.
•
path
path specifies where to save the configuration file on the remote computer.
•
new-filename
is the new filename for the configuration file. To use the current
filename, specify the current filename or exclude this parameter from the command.
When prompted, type the password to connect to the remote computer. For example:
ruggedcom# file scp-config-to-url default_config
jsmith@10.200.20.39:/c:/ruggedcom/default_config
jsmith@10.200.20.39's password:
standard_config.txt 100% 7673
7.5KB/s 00:00
file
scp-featurekey-from-url
user
@
host
:/
path
/
current-filename
new-filename
Securely copies a feature key file from a remote computer to the device. The remote
computer must have an SCP or SSH (secure shell) service or client installed and running.
To use this command, the user credentials for the remote computer, the IP address or host
name of the remote computer, the directory path to the feature key file on the remote
computer, and the feature key file filename must all be known.
Type the command in the following format:
file scp-featurekey-from-url current-filename user @ host :/ path / new-
filename
Where:
•
user
is a user name with access rights to the remote computer.
•
host
is the host name or IP address of the remote computer.
•
path
path is the path to the feature key file on the remote computer.
•
current-filename
is the current filename of the feature key file.
•
new-filename
is the new filename for the feature key file. To use the current filename,
specify the current filename or exclude this parameter from the command.
When prompted, type the password to connect to the remote computer. For example:
ruggedcom# file scp-featurekey-from-url jsmith@10.200.20.39:/c:/
ruggedcom/1_cmRX1K-12-11-0015.key 1_cmRX1K-12-11-0015.key
jsmith@10.200.20.39's password:
1_cmRX1K-12-11-0015.key 100% 192
0.2KB/s 00:00
file
scp-featurekey-to-
url current-filename
user @ host :/ path / new-filename
Securely copies a feature key file to a remote computer from the device. The remote
computer must have an SCP or SSH (secure shell) service or client installed and running.
To use this command, the user credentials for the remote computer, the IP address or host
name of the remote computer, the directory path to the feature key file on the remote
computer, and the feature key file filename must all be known.
Type the command in the following format: