Chapter 6
Security
RUGGEDCOM ROX II
CLI User Guide
202
Adding a NAT Setting
!
!
!
If no NAT settings have been configured, add NAT settings as needed. For more information, refer to
Section 6.9.13.2, “Adding a NAT Setting”
Section 6.9.13.2
Adding a NAT Setting
To configure a Network Address Translation (NAT) entry, do the following:
1. Make sure the CLI is in Configuration mode.
2. Add the entry by typing:
security
firewall fwconfig
firewall
fwnat
name
Where:
•
firewall
is the name of the firewall
•
name
is the name of the network address translation entry
3. Configure the following parameter(s) as required:
Parameter
Description
external-addr { external-addr }
Synopsis:
A string
The external IP Address. The address must not be a DNS name. External IP addresses
must be manually added to the interface.
This parameter is mandatory.
interface { interface }
Synopsis:
A string
An interface that has an external IP address.
This parameter is mandatory.
ipalias
Create IP Alias for NAT rule.
internal-addr { internal-addr }
Synopsis:
A string
The internal IP address. The address must not be a DNS Name.
This parameter is mandatory.
limit-interface
Translation only effective from the defined interface.
local
Translation effective from the firewall system.
description { description }
Synopsis:
A string
(Optional) The description string for this NAT entry.
4. Type
commit
and press
Enter
to save the changes, or type
revert
and press
Enter
to abort.
Section 6.9.13.3
Deleting a NAT Setting
To delete a network address translation entry, do the following:
1. Make sure the CLI is in Configuration mode.
Summary of Contents for RUGGEDCOM ROX II
