Siemens RUGGEDCOM ROX II, User Manual

Page: 604 / 798

Chapter 13
Unicast and Multicast Routing
RUGGEDCOM ROX II
CLI User Guide
558 Viewing VRF Interface Statistics
Section 13.11.2
Viewing VRF Interface Statistics
To view statistics for interfaces associated with a VRF instance, type:
show interfaces vrf
vrf
ip
Where:
•
vrf
is the chosen VRF list
A table or list similar to the following example appears:
ruggedcom# show interfaces vrf VRF1 ip | tab
ADMIN RX RX RX RX TX TX TX TX
TX IPV4
NAME STATE STATE POINTOPOINT BYTES PACKETS ERRORS DROPPED BYTES PACKETS ERRORS
DROPPED COLLISIONS ADDRESS
---------------------------------------------------------------------------------------------------------------
fe-1-1 not set not set false 8842726 117751 0 0 5366914 64721 0 0
0
1.9.5.2/24
fe-1-2 not set not set false 4874496 70821 0 0 5849272 71022 0 0
0
1.7.5.1/24
fe-1-3 not set not set false 7730176 120784 0 0 9423076 120810 0 0
0
1.1.1.1/32
This table or list provides the following information:
Parameter Description
name Synopsis: A string 1 to 15 characters long
The name of the interface.
admin-state Synopsis: { not set, up, down, testing, unknown, dormant, notPresent, lowerLayerDown }
The port's administrative status.
This parameter is mandatory.
state Synopsis: { not set, up, down, testing, unknown, dormant, notPresent, lowerLayerDown }
Shows whether the link is up or down.
This parameter is mandatory.
pointopoint Synopsis: { true, false }
The point-to-point link.
This parameter is mandatory.
bytes Synopsis: A 64-bit unsigned integer
The number of bytes received.
This parameter is mandatory.
packets Synopsis: A 64-bit unsigned integer
The number of packets received.
This parameter is mandatory.
errors Synopsis: A 32-bit unsigned integer
The number of error packets received.