Chapter 8
Layer 2
RUGGEDCOM ROX II
CLI User Guide
314
Deleting a Forbidden Port
Where:
•
name
is the name of the static VLAN
•
slot
is the name of the module location
•
port
is the port number (or a list of ports, if aggregated in a port trunk) for the module
3. Type
commit
and press
Enter
to save the changes, or type
revert
and press
Enter
to abort.
Section 8.5.6.3
Deleting a Forbidden Port
To delete a forbidden port, do the following:
1. Make sure the CLI is in Configuration mode.
2. Navigate to
switch » vlans » static-vlan » {name} » forbidden-ports
, where
{name}
is the name of the static
VLAN.
3. Configure the following parameter(s) as required:
no
switch vlans static-vlan
name
forbidden-ports
slot
port
Where:
•
name
is the name of the static VLAN
•
slot
is the name of the module location
•
port
is the port number (or a list of ports, if aggregated in a port trunk) for the module
4. Type
commit
and press
Enter
to save the changes, or type
revert
and press
Enter
to abort.
Section 8.5.7
Managing VLANs for Interfaces and Tunnels
This section describes how to view, add and delete tunnels for specific interfaces and tunnels.
•
Section 12.1.8, “Managing VLANs for Virtual Switches”
•
Section 12.4.6, “Managing VLANs for L2TPv3 Tunnels”
•
Section 4.18.3, “Managing VLANs for Routable Ethernet Ports”
Summary of Contents for RUGGEDCOM ROX II
