RUGGEDCOM ROX II
CLI User Guide
Chapter 6
Security
Configuring RADIUS Authentication for Switched Ethernet
Ports
141
Parameter
Description
The IPv4 address of the server.
port-udp { port-udp }
Synopsis:
A 32-bit signed integer between 1 and 65535
Default:
1812
password { password }
Synopsis:
A string
4. Type
commit
and press
Enter
to save the changes, or type
revert
and press
Enter
to abort.
Section 6.7.3.3
Configuring RADIUS Authentication for Switched Ethernet Ports
To configure RADIUS authentication for switched Ethernet ports, do the following:
IMPORTANT!
Passwords are case-sensitive.
1. Make sure the CLI is in Configuration mode.
2. Type the following:
switch
port-security radius
3. Configure the primary or secondary RADIUS server by typing either
primary
or
secondary
and configuring
the following parameter(s) as required:
Parameter
Description
address { address }
Synopsis:
A string 7 to 15 characters long
The IPv4 address of the server.
port-udp { port-udp }
Synopsis:
A 32-bit signed integer between 1 and 65535
Default:
1812
The IPv4 port of the server.
password { password }
Synopsis:
A string
The password of the server
4. Type
commit
and press
Enter
to save the changes, or type
revert
and press
Enter
to abort.
Section 6.7.4
Configuring Authentication
(Terminal Access Controller Access-Control System Plus) is a TCP-based protocol which provides access
control for routers, network access servers and other networked computing devices via one or more centralized
servers. provides separate authentication, authorization and accounting services.
Primary and secondary servers, typically operating from a common database, can be configured for
redundancy. If the first server does not respond to an authentication request, the request will be forwarded to the
second server until a positive/negate acknowledgment is received.
Summary of Contents for RUGGEDCOM ROX II
