Chapter 6
Security
RUGGEDCOM ROX II
CLI User Guide
140
Configuring RADIUS Authentication for PPP Services
IMPORTANT!
Passwords are case-sensitive.
1. Make sure the CLI is in Configuration mode.
2. Type the following:
admin
authentication radius
3. [Optional] If port security is enabled on any ports, configuring the following parameter(s) to avoid conflicts
with firewall rules/policies:
Parameter
Description
nas-ip-address { nas-ip-address }
Synopsis:
A string 7 to 15 characters long or a string 6 to 40 characters long
The NAS-IP-Address. Set this to the primary IP address of the unit.
nas-identifier { nas-identifier }
Synopsis:
A string 1 to 64 characters long
The NAS-Identifier. If not set, the hostname will be used as the NAS-Identifier.
4. Configure the primary or secondary RADIUS server by typing either
primary
or
secondary
and configuring
the following parameter(s) as required:
Parameter
Description
address { address }
Synopsis:
A string 7 to 15 characters long or a string 6 to 40 characters long
The IP address of the server.
port-udp { port-udp }
Synopsis:
A 32-bit signed integer between 1 and 65535
Default:
1812
The network port of the server.
password { password }
Synopsis:
A string
The password of the RADIUS server.
5. Type
commit
and press
Enter
to save the changes, or type
revert
and press
Enter
to abort.
Section 6.7.3.2
Configuring RADIUS Authentication for PPP Services
To configure RADIUS authentication for PPP services, do the following:
IMPORTANT!
Passwords are case-sensitive.
1. Make sure the CLI is in Configuration mode.
2. Type the following:
global
ppp radius
3. Configure the primary or secondary RADIUS server by typing either
primary
or
secondary
and configuring
the following parameter(s) as required:
Parameter
Description
address { address }
Synopsis:
A string 7 to 15 characters long
Summary of Contents for RUGGEDCOM ROX II
