Chapter 17
Time Services
RUGGEDCOM ROX II
CLI User Guide
738
Adding a Server Key
Section 17.8.5.2
Adding a Server Key
To add a server key, do the following:
1. Make sure the CLI is in Configuration mode.
2. Add the key by typing:
services
ntp key
id
Where:
•
id
is the ID assigned to the key
3. Configure the following parameter(s) as required:
Parameter
Description
value { value }
Synopsis:
A string 1 to 1024 characters long
The key.
This parameter is mandatory.
trusted
Mark this key as trusted for the purposes of authenticating peers with symmetric key
cryptography. The authentication procedures require that both the local and remote
servers share the same key and key identifier.
4. Type
commit
and press
Enter
to save the changes, or type
revert
and press
Enter
to abort.
Section 17.8.5.3
Deleting a Server Key
To delete a server key, do the following:
1. Make sure the CLI is in Configuration mode.
2. Delete the chosen key by typing:
no
services ntp key
id
Where:
•
id
is the ID assigned to the key
3. Type
commit
and press
Enter
to save the changes, or type
revert
and press
Enter
to abort.
Section 17.8.6
Managing Server Restrictions
Server restrictions control access to the NTP servers.
CONTENTS
•
Section 17.8.6.1, “Viewing a List of Server Restrictions”
•
Section 17.8.6.2, “Adding a Server Restriction”
•
Summary of Contents for RUGGEDCOM ROX II
