RUGGEDCOM ROX II
CLI User Guide
Chapter 7
IP Address Assignment
Deleting an IP Range (IPv6)
253
Section 7.3.14.3
Deleting an IP Range (IPv6)
To delete an IP range from a DHCP subnet or one of its associated address pools, do the following:
1. Make sure the CLI is in Configuration mode.
2. Delete the IP range by typing:
•
For a DHCP IPv6 subnet
no
dhcpserver6 subnet6-name
name
options iprange6
start
end
end
•
For an IPv6 address pool
no
services dhcpserver6 subnet6-name
name
options ippool6
description
iprange6
start
end
end
Where:
•
name
is the name of the subnet
•
description
(if applicable) is the name of the address pool
•
start
is the starting IP address pool the server uses to offer to the client
•
end
is the ending IP address pool the server uses to offer to the client
3. Type
commit
and press
Enter
to save the changes, or type
revert
and press
Enter
to abort.
Section 7.3.15
Managing IPv6 Prefixes
One or more optional IPv6 prefix can be defined for the server to offer to the client.
A
prefix6
delegation includes the IPv6 subnetwork, along with the prefix length in bits. The subnetwork value
used should be within the subnetwork value of the enclosing subnet6 declaration.
CONTENTS
•
Section 7.3.15.1, “Viewing a List of IPv6 Prefixes”
•
Section 7.3.15.2, “Adding an IPv6 Prefix”
•
Section 7.3.15.3, “Deleting an IPv6 Prefix”
Section 7.3.15.1
Viewing a List of IPv6 Prefixes
To view a list of IP ranges configured for a DHCP subnet, type:
For DHCP IPv6 subnets
show
running-config services dhcpserver6 subnet6-name
name
options prefix6
Where:
•
name
is the name of the subnet
If prefixes have been configured, a table or list similar to the following example appears:
ruggedcom# show running-config services dhcpserver6 subnet6-name sub2 options prefix6
services
Summary of Contents for RUGGEDCOM ROX II
