RUGGEDCOM ROX II
CLI User Guide
Chapter 13
Unicast and Multicast Routing
Example: Basic Route Reflection
507
BGP Neighbors In an IPv4 Address Family
To configure a BPG neighbor that belongs to an IPv4 address family to be a client of the device, do the following:
1. Make sure an IPv4 address family is defined. For more information, refer to
Section 13.11.10.2, “Adding an
.
2. Configure the desired BGP neighbor in the IPv4 address family to be a client of the route reflector by typing:
routing
bgp address-family vrf
definition
neighbor
address
route-reflector-client enabled
Where:
•
definition
is the name of the VRF definition
•
address
is the IP address of the BGP neighbor
3. Type
commit
and press
Enter
to save the changes, or type
revert
and press
Enter
to abort.
BGP Neighbors In a VPNv4 Address Family
To configure a BPG neighbor that belongs to a VPNv4 address family to be a client of the device, do the following:
1. Make sure a VPNv4 address family is defined. For more information, refer to
.
2. Configure the desired BGP neighbor in the VPNv4 address family to be a client of the route reflector by typing:
routing
bgp address-family vpnv4
address
route-reflector-client enabled
Where
address
is the IP address of the BGP neighbor.
3. Type
commit
and press
Enter
to save the changes, or type
revert
and press
Enter
to abort.
Section 13.8.11.4
Example: Basic Route Reflection
This example demonstrates how to configure a partially-meshed Autonomous System (AS) where a route reflector
advertises routes to clients and non-clients.
Overview
In the following topology, routes advertised by the external BGP (eBGP) router (labeled as R1) are forwarded to
the route reflector (labeled as RR). The route reflector then in turn readvertises the routes to its BGP neighbors.
Neighbors within the route reflector's cluster are the clients (labeled C1, C2 and C3). Neighbors outside of the
cluster are non-clients (labeled NC1, NC2 and NC3).
Summary of Contents for RUGGEDCOM ROX II
