RUGGEDCOM ROX II
CLI User Guide
Chapter 12
Tunneling and VPNs
Deleting a Session
385
Parameter
Description
Lower value of cookie. This value must match with low-value of other endpoint's remote
cookie
high-value { high-value }
Synopsis:
A 32-bit unsigned integer
Higher value of cookie if the cookie size is 8. This value must match with high-value of
other endpoint's remote cookie
IMPORTANT!
Configuration of the remote cookie should match the configuration of the local cookie on the
device at the other end of the L2TPv3 tunnel.
5. Type
remote-cookie
and then configure the following parameters as required:
Parameter
Description
size { size }
Synopsis:
{ 4, 8 }
Cookie size in byte
low-value { low-value }
Synopsis:
A 32-bit unsigned integer
Lower value of cookie. This value must match with low-value of other endpoint's local
cookie
high-value { high-value }
Synopsis:
A 32-bit unsigned integer
Higher value of cookie if its size is 8. This value must match with high-value of other
endpoint's local cookie
6. Type
commit
and press
Enter
to save the changes, or type
revert
and press
Enter
to abort.
Section 12.4.5.3
Deleting a Session
To delete a session for a static or dynamic L2TPv3 tunnel, do the following:
1. Make sure the CLI is in Configuration mode.
2. Delete the tunnel by typing:
no
tunnel l2tpv3 [ static | dynamic ] tunnel
tunnel-name
session
tunnel-session
Where:
•
tunnel-name
is the name of the tunnel
•
tunnel-session
is the name of the tunnel session
3. Type
commit
and press
Enter
to save the changes, or type
revert
and press
Enter
to abort.
Summary of Contents for RUGGEDCOM ROX II
