Chapter 13
Unicast and Multicast Routing
RUGGEDCOM ROX II
CLI User Guide
566
Deleting a VRF Instance
Parameter
Description
The metric type for default route.
route-map { route-map }
Synopsis:
A string
The route map name.
external { external }
Synopsis:
A 32-bit unsigned integer between 1 and 255
The administrative distance for external routes.
inter-area { inter-area }
Synopsis:
A 32-bit unsigned integer between 1 and 255
The administrative distance for inter-area routes.
intra-area { intra-area }
Synopsis:
A 32-bit unsigned integer between 1 and 255
The administrative distance for intra-area routes.
3. Configure prefix list filters for the VRF instance. For more information, refer to
4. Configure areas for the VRF instance. For more information, refer to
Section 13.9.5.2, “Adding an Area”
.
5. Configure route map filters for the VRF instance. For more information, refer to
6. Configure redistribution metrics for the VRF instance. For more information, refer to
“Adding a Redistribution Metric”
.
7. Configure interfaces for the VRF instance. For more information, refer to
Section 13.9.9.2, “Configuring a
.
8. Type
commit
and press
Enter
to save the changes, or type
revert
and press
Enter
to abort.
Section 13.11.7.3
Deleting a VRF Instance
To delete a VRF instance under OSPF, do the following:
1. Make sure the CLI is in Configuration mode.
2. Delete the definition key by typing:
no
routing ospf vrf
name
Where:
•
name
is the name of the VRF instance
3. Type
commit
and press
Enter
to save the changes, or type
revert
and press
Enter
to abort.
Section 13.11.8
Managing IP/VPN Tunnels
IP/VPN tunnels use the VPNv4 protocol to exchange customer prefixes (i.e. route distributions and route targets)
and labels between Provider Edge (PE) routers. IP/VPNs provide isolation of the interfaces connecting each end of
the VPN.
Summary of Contents for RUGGEDCOM ROX II
