Siemens RUGGEDCOM ROX II, User Manual

Page: 302 / 798

Chapter 7
IP Address Assignment
RUGGEDCOM ROX II
CLI User Guide
256 Deleting a Temporary Subnet
services dhcpserver6 subnet6-name name options temporarysubnet6 temporaryname
Where:
•
name
is the name of the subnet
• temporaryname is the name of the temporary subnet
3. Type commit and press Enter to save the changes, or type revert and press Enter to abort.
Section 7.3.16.3
Deleting a Temporary Subnet
To delete a prefix, do the following:
1. Make sure the CLI is in Configuration mode.
2. Delete the prefix by typing:
no services dhcpserver6 subnet6-name name options temporarysubnet6 temporaryname
Where:
•
name
is the name of the subnet
•
temporaryname
is the temporary subnet
3. Type commit and press Enter to save the changes, or type revert and press Enter to abort.
Section 7.3.17
Managing IPv6 Subnets
One or more optional IPv6 subnets can be defined for the server to offer to the client.
CONTENTS
• Section 7.3.17.1, “Viewing a List of IPv6 Subnets”
• Section 7.3.17.2, “Adding a IPv6 Subnet”
• Section 7.3.17.3, “Deleting an IPv6 Subnet”
Section 7.3.17.1
Viewing a List of IPv6 Subnets
To view a list of IPv6 subnets, type:
show running-config services dhcpserver6 subnet6-name
name
options subnet6
Where:
•
name
is the name of the subnet
If IPv6 subnets have been configured, a table or list similar to the following example appears:
ruggedcom# show running-config services dhcpserver6 subnet6-name sub2 options subnet6
services
dhcpserver6