RUGGEDCOM ROX II
CLI User Guide
Chapter 7
IP Address Assignment
Adding a IPv6 Subnet
257
subnet6-name sub2
options
subnet6 2001:db8:28d2::/64
!
!
!
!
!
If no prefixes have been configured, add ranges as needed. For more information, refer to
Section 7.3.17.2
Adding a IPv6 Subnet
To add a IPv6 subnet, do the following:
1. Make sure the CLI is in Configuration mode.
2. Add the IPv6 subnet by typing:
services
dhcpserver6 subnet6-name
name
options subnet6
subnet6name
Where:
•
name
is the name of the subnet
•
subnet6name
is the name of the IPv6 subnet
3. Configure the following parameter(s) as required:
Parameter
Description
{ subnet-number }
Synopsis:
A string 4 to 43 characters long
The IPv6 subnet that the server uses to offer to the client.
This parameter is mandatory.
4. Type
commit
and press
Enter
to save the changes, or type
revert
and press
Enter
to abort.
Section 7.3.17.3
Deleting an IPv6 Subnet
To delete an IPv6 subnet, do the following:
1. Make sure the CLI is in Configuration mode.
2. Delete the prefix by typing:
no
services dhcpserver6 subnet6-name
name
options subnet6
subnet6name
Where:
•
name
is the name of the subnet
•
subnet6name
is the name of the IPv6 subnet
3. Type
commit
and press
Enter
to save the changes, or type
revert
and press
Enter
to abort.
Summary of Contents for RUGGEDCOM ROX II
