manualshive.com logo in svg

Siemens RUGGEDCOM ROX II, User Manual

Introducing the Siemens RUGGEDCOM ROX II, a robust and reliable networking solution designed for extreme environments. Enhance your understanding of its advanced features and functionalities with our comprehensive User Manual. Download the user manual for free from manualshive.com and explore the full potential of this exceptional product.

Share
Download
background image

Chapter 14

Network Redundancy

RUGGEDCOM ROX II

CLI User Guide

622

Managing Link Failover Parameters

show

 services link-failover status

A table or list similar to the following appears:

ruggedcom# show services link-failover status

             MAIN    BACKUP  MAIN                                                   BACKUP

             LINK    LINK    PING  TIME OF LAST STATE                               INTERFACE

MAIN         STATUS  STATUS  TEST  CHANGE                     LINK BACKUP STATE     IN USE

---------------------------------------------------------------------------------------------

switch.0001  up      down    ok    Fri Jan 25 09:49:52 2013  Main path is active  fe-1-1

The table or list provides the following information:

Parameter

Description

main-link-status

Synopsis:   

A string

The main link status.

backup-link-status

Synopsis:   

A string

The backup link status.

main-ping-test

Synopsis:   

A string

The results of pinging the target using the main interface.

time-of-last-state-change

Synopsis:   

A string

The time of the last state change.

link-backup-state

Synopsis:   

A string

The backup link state.

backup-interface-in-use

Synopsis:   

A string

The name of the backup interface that is being used.

Section 14.2.3

Managing Link Failover Parameters

This section describes how to manage parameter settings for link failover.

CONTENTS

•

Section 14.2.3.1, “Viewing a List of Link Failover Parameters”

•

Section 14.2.3.2, “Adding a Link Failover Parameter”

•

Section 14.2.3.3, “Deleting a Link Failover Parameter”

Section 14.2.3.1

Viewing a List of Link Failover Parameters

To view a list of link failover parameters, type:

show

 running-config services link-failover

If parameters have been configured, a table or list similar to the following example appears:

ruggedcom# show running-config services link-failover

services

Summary of Contents for RUGGEDCOM ROX II































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for RUGGEDCOM ROX II

Makita RF1101 Parts Breakdown preview
RF1101
Brand: Makita Pages: 2
3Com 3CR860-95 - OfficeConnect Secure Router Features And Benefits preview
3CR860-95 - OfficeConnect Secure Router
Brand: 3Com Pages: 2
3Com 3C905-TX Installation Manual preview
3C905-TX
Brand: 3Com Pages: 26
Patton electronics 1090 Service Manual preview
1090
Brand: Patton electronics Pages: 8
X-Micro WLAN 11g User Manual preview
WLAN 11g
Brand: X-Micro Pages: 74
F5 i5000 Series Platform Manual preview
i5000 Series
Brand: F5 Pages: 72
D-Link G416 User Manual preview
G416
Brand: D-Link Pages: 176
3Com 3C13886 - Router OC-3 ATM SML Flexible Interface... Installation Manual preview
3C13886 - Router OC-3 ATM SML Flexible Interface...
Brand: 3Com Pages: 171
3Com OfficeConnect WX2200 User Manual preview
OfficeConnect WX2200
Brand: 3Com Pages: 204
Opvimus UMX-ETH+ Operating Instructions Manual preview
UMX-ETH+
Brand: Opvimus Pages: 12
LogLogic LX 1010 Quick Start Manual preview
LX 1010
Brand: LogLogic Pages: 30
Mercusys MR30G Quick Installation Manual preview
MR30G
Brand: Mercusys Pages: 35
Acces I/O products MPCIE-ICM232-2 Hardware Manual preview
MPCIE-ICM232-2
Brand: Acces I/O products Pages: 5
Enertronica Santerno SINUS H PROFInet User Manual preview
SINUS H PROFInet
Brand: Enertronica Santerno Pages: 34
MF DIGITAL DIRECTOR PRO series Operator'S Manual preview
DIRECTOR PRO series
Brand: MF DIGITAL Pages: 79
Kontron 50099 067 User Manual preview
50099 067
Brand: Kontron Pages: 42
Lanner NCA-1040 User Manual preview
NCA-1040
Brand: Lanner Pages: 59
B-G Instruments DataPlot CB1224 Manual preview
DataPlot CB1224
Brand: B-G Instruments Pages: 4

Brands by name

Popular brands

Load more brands