Chapter 13
Unicast and Multicast Routing
RUGGEDCOM ROX II
CLI User Guide
484
Deleting a Route Map Filter Entry
no
routing bgp filter route-map
tag
Where:
•
tag
is the tag for the route map filter
3. Type
commit
and press
Enter
to save the changes, or type
revert
and press
Enter
to abort.
Section 13.8.2.6
Deleting a Route Map Filter Entry
To delete an entry for a route map filter, do the following:
1. Make sure the CLI is in Configuration mode.
2. Delete the filter key by typing:
no
routing bgp filter route-map
tag
entry
number
Where:
•
tag
is the tag for the route map filter
•
number
is the sequence number for the entry
3. Type
commit
and press
Enter
to save the changes, or type
revert
and press
Enter
to abort.
Section 13.8.2.7
Configuring Match Rules
To configure match rules for a route map filter entry, do the following:
1. Make sure the CLI is in Configuration mode.
2. Navigate to
routing » bgp » filter » route-map » {tag} » entry » {number} » match
, where
{tag}
is the tag
for the route map filter and
{number}
is the sequence number for the entry.
3. Configure the following parameters as required:
Parameter
Description
as-path { as-path }
Synopsis:
A string
Match the BGP AS path filter.
metric { metric }
Synopsis:
A 32-bit unsigned integer
Match the route metric.
peer { peer }
Synopsis:
A string 7 to 15 characters long
This parameter is not supported and any value is ignored by the system.s
origin { origin }
Synopsis:
{ egp, igp, incomplete }
Match the BGP origin code.
4. Type
commit
and press
Enter
to save the changes, or type
revert
and press
Enter
to abort.
Summary of Contents for RUGGEDCOM ROX II
