Chapter 6
Security
RUGGEDCOM ROX II
CLI User Guide
142
Configuring Authentication
IMPORTANT!
The user authentication mode must be set to
tacacsplus_local
or
tacacsplus_only
for users to be
authenticated against the server. For more information about setting the authentication
Section 6.7.1, “Setting the User Authentication Mode”
.
To configure authentication, do the following:
IMPORTANT!
Passwords are case-sensitive.
1. Make sure the CLI is in Configuration mode.
2. Type the following:
admin
authentication tacacsplus
3. On the
Tacacsplus Server Privilege Settings
form, configure the following parameters as required:
Parameter
Description
admin-priv { admin-priv }
Synopsis:
A string 1 to 5 characters long
Default:
15
The privilege level(s) for administrator (admin) users. Options include any number
between 0 and 15, or a range (e.g. 4-12).
oper-priv { oper-priv }
Synopsis:
A string 1 to 5 characters long
Default:
2-14
The privilege level(s) for operator (oper) users. Options include any number between 0
and 15, or a range (e.g. 4-12).
guest-priv { guest-priv }
Synopsis:
A string 1 to 5 characters long
Default:
1
The privilege level(s) for guest users. Options include any number between 0 and 15, or
a range (e.g. 4-12).
4. On the
Primary Tacacsplus Server
form, configure the following parameters as required:
Parameter
Description
address { address }
Synopsis:
A string 7 to 15 characters long or a string 6 to 40 characters long
The IP address of the server.
port-tcp { port-tcp }
Synopsis:
A 32-bit signed integer between 1 and 65535
Default:
49
The TCP port to use when connecting the server. The default port is 49.
authentication-key { authentication-key }
Synopsis:
A string
The authentication key to use for encrypting and decrypting traffic. Use only
ASCII characters.
5. On the
Secondary Tacacsplus Server
form, configure the following parameters as required:
Parameter
Description
address { address }
Synopsis:
A string 7 to 15 characters long or a string 6 to 40 characters long
The IP address of the server.
port-tcp { port-tcp }
Synopsis:
A 32-bit signed integer between 1 and 65535
Default:
49
Summary of Contents for RUGGEDCOM ROX II
