RUGGEDCOM ROX II
CLI User Guide
Chapter 13
Unicast and Multicast Routing
Deleting a Static Route
583
3. Configure the next hop IP address (gateway) or interface. Only one can be configured per static route.
For more information, refer to
Section 13.12.6.1, “Configuring Gateways for IPv6 Static Routes”
Section 13.12.7.1, “Configuring Interfaces for IPv6 Static Routes”
4. Type
commit
and press
Enter
to save the changes, or type
revert
and press
Enter
to abort.
Section 13.12.4
Deleting a Static Route
To delete a static route, do the following:
1. Make sure the CLI is in Configuration mode.
2. Delete the static route by typing:
no
routing
protocol
route
subnet
Where:
•
protocol
is either
IPv4
or
IPv6
•
subnet
is the subnet (network/prefix) of the static route
3. Type
commit
and press
Enter
to save the changes, or type
revert
and press
Enter
to abort.
Section 13.12.5
Configuring a Black Hole Connection for an IPv4 Static Route
To configure a black hole connection for an IPV4 static route, do the following:
1. Make sure the CLI is in Configuration mode.
2. Navigate to
routing » ipv4 » {subnet} » blackhole
, where
subnet
is the subnet (network/prefix) of the static
route.
3. Configure the following parameter(s) as required:
Parameter
Description
distance { distance }
Synopsis:
A 32-bit unsigned integer between 1 and 255
Default:
1
The distance for this static route's blackhole. Default is 1.
4. Type
commit
and press
Enter
to save the changes, or type
revert
and press
Enter
to abort.
Section 13.12.6
Managing Gateways for Static Routes
If the device is not directly connected to the next-hop router, configure a static route to forward traffic to the next-
hop router's IP address. This is referred to as a
gateway
.
Summary of Contents for RUGGEDCOM ROX II
