SEW-Eurodrive MOVI-C MOVISAFE CS A Series Manual Download Page 93

Page: 93 / 100

Fault list – safety technology

Fault 70 Safe brake system

Manual – Fault Descriptions MOVISAFE

CS..A

Subfault: 70.16

Description: Safe brake test aborted. Fault in effective direction of test torque.

Fault class: Warning

Cause

Measure

The torque specified by the basic unit has the
wrong effective direction.

– Check the settings of the basic unit and adjust,
if necessary.

– Check the settings for direction of rotation re-
versal and adjust, if necessary.

Subfault: 70.18

Description: Safe brake test aborted. Error, error acknowledgment.

Fault class: System error

Cause

Measure

Fault acknowledged during safe brake test.

Deactivate the safe brake test before acknowled-
ging the fault.

Subfault: 70.19

Description: Safe brake test aborted. Drive safety function signals limit violation.

Fault class: Warning

Cause

Measure

Limit violation signaled by drive safety function
active at the same time (e.g. SLS) during safe
brake test.

– Check which drive safety function signaled the
limit violation.

– Refer to the measures in the fault description to
eliminate the fault.

Subfault: 70.20

Description: Safe brake test aborted. Safety card fault.

Fault class: Warning

Cause

Measure

Fault detected by safety card during safe brake
test.

– Check which fault has occurred.

– Refer to the measures in the fault description to
eliminate the fault.

Subfault: 70.22

Description: Safe brake test aborted. Fault while checking load torque.

Fault class: Warning

Cause

Measure

Failed to check load torque while executing safe
brake test. Cannot determine load torque.

– Extend the duration of the individual test steps.

– Deactivate load torque checking (load
torque = 0).

27799182/EN – 10/2022

Summary of Contents for MOVI-C MOVISAFE CS A Series





































































































Search results

Summary of Contents for MOVI-C MOVISAFE CS A Series

Reviews:

Related manuals for MOVI-C MOVISAFE CS A Series

Brands by name

Popular brands

SEW-Eurodrive MOVI-C MOVISAFE CS A Series, Manual

Search results

Summary of Contents for MOVI-C MOVISAFE CS A Series

Reviews:

Related manuals for MOVI-C MOVISAFE CS A Series

Brands by name

Popular brands