SEW-Eurodrive MOVI-C MOVISAFE CS A Series Manual Download Page 92

Page: 92 / 100

Fault list – safety technology

Fault 70 Safe brake system

Manual – Fault Descriptions MOVISAFE

CS..A

Subfault: 70.12

Description: Safe brake test aborted. Error, assignment of drive safety function SBC.

Fault class: Warning

Cause

Measure

SBC drive safety function not assigned to safe
digital output F‑DO.

– Check the parameter setting of the safety card.

– Assign the SBC drive safety function to one of
the safe digital outputs F‑DO and connect the
brake control (e.g. BST) to it.

Subfault: 70.13

Description: Safe brake test aborted. Error, movement during idle state.

Fault class: Warning

Cause

Measure

Maximum movement permitted at idle state ex-
ceeded.

Brake or basic unit cannot hold the load torque.

– Check

Permitted movement during idle state

parameter and correct, if necessary.

– Make sure that the brake control is correct.

– Make sure that the basic unit provides the re-
quired power.

– Make sure that the brake can hold the load
torque and the test torque.

Subfault: 70.14

Description: Safe brake test aborted. Minimum speed fault.

Fault class: Warning

Cause

Measure

Speed greater than parameterized minimum
speed detected at end of retraction distance.

– Check the settings of the safety card and ad-
just, if necessary.

– Check the settings of the basic unit and adjust,
if necessary.

– Make sure that the basic unit is not subject to
overload.

Subfault: 70.15

Description: Safe brake test aborted. Minimum speed fault.

Fault class: Warning

Cause

Measure

Speed greater than parameterized minimum
speed detected when activating brake test.

Check the minimum speed and adjust, if neces-
sary.

27799182/EN – 10/2022

Summary of Contents for MOVI-C MOVISAFE CS A Series





































































































Search results

Summary of Contents for MOVI-C MOVISAFE CS A Series

Reviews:

Related manuals for MOVI-C MOVISAFE CS A Series

Brands by name

Popular brands

SEW-Eurodrive MOVI-C MOVISAFE CS A Series, Manual

Search results

Summary of Contents for MOVI-C MOVISAFE CS A Series

Reviews:

Related manuals for MOVI-C MOVISAFE CS A Series

Brands by name

Popular brands