SEW-Eurodrive MOVI-C MOVISAFE CS A Series Manual Download Page 26

Page: 26 / 100

Fault list – safety technology

Fault 15 Encoder 3

Manual – Fault Descriptions MOVISAFE

CS..A

Subfault: 15.53

Description: Maximum frequency exceeded

Response: FS – warning

Cause

Measure

Maximum permitted signal frequency exceeded.

– Check the maximum input frequency.

– Check the wiring.

– Check interference sources.

– Apply the shield of the encoder cable over a
large area.

– Check the encoder.

Subfault: 15.54

Description: Cross comparison error

Response: FS – warning

Cause

Measure

Cross comparison error in encoder evaluation.

– Check the wiring.

– Check interference sources.

– Apply the shield of the encoder cable over a
large area.

– Check the encoder.

Subfault: 15.55

Description: Signal level monitoring

Response: FS – warning

Cause

Measure

Track signal level not within tolerance band.

– Check the wiring.

– Check interference sources.

– Apply the shield of the encoder cable over a
large area.

– Check the encoder.

Subfault: 15.56

Description: Maximum speed exceeded while encoder fault muting is active.

Response: FS – system error

Cause

Measure

Maximum permitted speed exceeded while en-
coder fault muting is active.

– Check the maximum speed of the application
while encoder fault muting is active and adjust if
necessary.

– Check the parameter setting of the safety card
and adjust if necessary.

27799182/EN – 10/2022

Summary of Contents for MOVI-C MOVISAFE CS A Series





































































































Search results

Summary of Contents for MOVI-C MOVISAFE CS A Series

Reviews:

Related manuals for MOVI-C MOVISAFE CS A Series

Brands by name

Popular brands

SEW-Eurodrive MOVI-C MOVISAFE CS A Series, Manual

Search results

Summary of Contents for MOVI-C MOVISAFE CS A Series

Reviews:

Related manuals for MOVI-C MOVISAFE CS A Series

Brands by name

Popular brands