SEW-Eurodrive MOVI-C MOVISAFE CS A Series Manual Download Page 80

Page: 80 / 100

Fault list – safety technology

Fault 67 Safe communication

Manual – Fault Descriptions MOVISAFE

CS..A

Subfault: 67.24

Description: Cyclic data exchange error

Fault class: System error

Cause

Measure

Cyclic data exchange error.

– Acknowledge the warning.

– Restart safe communication.

– If the warning occurs again, switch the device
off and on again.

– If the warning occurs repeatedly, contact
SEW‑EURODRIVE Service.

Subfault: 67.26

Description: Version error

Fault class: Warning

Cause

Measure

Communication partner version not supported.

– Switch the device off and on again.

– If the fault occurs repeatedly, contact
SEW‑EURODRIVE Service.

Subfault: 67.27

Description: Incompatibility error during communication

Fault class: Warning

Cause

Measure

Incompatibility/software error in one of the com-
munication partners (with correct telegram CRC)

– Switch the device off and on again.

– If the fault occurs repeatedly, contact
SEW‑ EURODRIVE Service.

Subfault: 67.28

Description: Timeout

Fault class: Warning

Cause

Measure

Safety protocol signaled timeout.

– Make sure that the communication path is not
interrupted (cables, voltages, load).

– Make sure that the communication channel
between fieldbus master and fieldbus slave has
been configured correctly.

– Make sure that the monitoring times set in the
fieldbus master are not too short.

27799182/EN – 10/2022

Summary of Contents for MOVI-C MOVISAFE CS A Series





































































































Search results

Summary of Contents for MOVI-C MOVISAFE CS A Series

Reviews:

Related manuals for MOVI-C MOVISAFE CS A Series

Brands by name

Popular brands

SEW-Eurodrive MOVI-C MOVISAFE CS A Series, Manual

Search results

Summary of Contents for MOVI-C MOVISAFE CS A Series

Reviews:

Related manuals for MOVI-C MOVISAFE CS A Series

Brands by name

Popular brands