SEW-Eurodrive MOVI-C MOVISAFE CS A Series Manual Download Page 73

Page: 73 / 100

Fault list – safety technology

Fault 66 Safety-related fault

Manual – Fault Descriptions MOVISAFE

CS..A

Subfault: 66.80

Description: Change of process data bit "cam slip adjustment" at wrong position

Response: FS – warning

Cause

Measure

The process data bit "slip adjustment cam"
changed the state at a position where no slip ad-
justment cam was configured.

– Check the parameter setting of the slip com-
pensation.

– Check the generation of process data in the
controller.

Subfault: 66.81

Description: Maximum distance slip adjustment exceeded

Response: FS – warning

Cause

Measure

Parameterized distance exceed without having
performed slip adjustment or referencing.

– Allow slip adjustment cams to be passed over
more frequently.

– Parameterize a longer distance.

Subfault: 66.89

Description: Two SREF functions activated at the same time

Response: FS – warning

Cause

Measure

Two SREF functions activated at the same time.

Perform a new referencing.

Subfault: 66.90

Description: Acknowledgment missing for restart

Fault class: System error

Cause

Measure

Acknowledging message required for restart.

Acknowledge the safety card.

Subfault: 66.91

Description: Parameter setting with non-acknowledged fault

Fault class: System error

Cause

Measure

Parameterization or validation performed while
fault is pending.

Acknowledge the error.

27799182/EN – 10/2022

Summary of Contents for MOVI-C MOVISAFE CS A Series





































































































Search results

Summary of Contents for MOVI-C MOVISAFE CS A Series

Reviews:

Related manuals for MOVI-C MOVISAFE CS A Series

Brands by name

Popular brands

SEW-Eurodrive MOVI-C MOVISAFE CS A Series, Manual

Search results

Summary of Contents for MOVI-C MOVISAFE CS A Series

Reviews:

Related manuals for MOVI-C MOVISAFE CS A Series

Brands by name

Popular brands