SEW-Eurodrive MOVI-C MOVISAFE CS A Series Manual Download Page 63

Page: 63 / 100

Fault list – safety technology

Fault 64 Position-dependent drive safety functions

Manual – Fault Descriptions MOVISAFE

CS..A

Subfault: 64.42

Description: SLP 2 limit position exceeded

Response: FS – warning

Cause

Measure

Limit position SLP exceeded.

Deactivate the SLP drive safety function before
acknowledging the fault. Set the SLP limit posi-
tion in the valid range. Activate the SLP drive
safety function again.

Subfault: 64.45

Description: SLP 1 limit speed exceeded in positive direction of movement

Response: FS – warning

Cause

Measure

SLP speed not reduced or not reduced fast
enough when approaching limit position.

Deactivate the SLP drive safety function before
acknowledging the fault. Reduce the SLP speed.
Activate the SLP drive safety function again.

Subfault: 64.46

Description: SLP 2 limit speed exceeded in positive direction of movement

Response: FS – warning

Cause

Measure

SLP speed not reduced or not reduced fast
enough when approaching limit position.

Deactivate the SLP drive safety function before
acknowledging the fault. Reduce the SLP speed.
Activate the SLP drive safety function again.

Subfault: 64.49

Description: SLP 1 limit speed exceeded in negative direction of movement

Response: FS – warning

Cause

Measure

SLP speed not reduced or not reduced fast
enough when approaching limit position.

Deactivate the SLP drive safety function before
acknowledging the fault. Reduce the SLP speed.
Activate the SLP drive safety function again.

Subfault: 64.50

Description: SLP 2 limit speed exceeded in negative direction of movement

Response: FS – warning

Cause

Measure

SLP speed not reduced or not reduced fast
enough when approaching limit position.

Deactivate the SLP drive safety function before
acknowledging the fault. Reduce the SLP speed.
Activate the SLP drive safety function again.

27799182/EN – 10/2022

Summary of Contents for MOVI-C MOVISAFE CS A Series





































































































Search results

Summary of Contents for MOVI-C MOVISAFE CS A Series

Reviews:

Related manuals for MOVI-C MOVISAFE CS A Series

Brands by name

Popular brands

SEW-Eurodrive MOVI-C MOVISAFE CS A Series, Manual

Search results

Summary of Contents for MOVI-C MOVISAFE CS A Series

Reviews:

Related manuals for MOVI-C MOVISAFE CS A Series

Brands by name

Popular brands