SEW-Eurodrive MOVI-C MOVISAFE CS A Series Manual Download Page 49

Page: 49 / 100

Fault list – safety technology

Fault 63 Speed-dependent drive safety function

Manual – Fault Descriptions MOVISAFE

CS..A

Subfault: 62.93

Description: STO fault during external watchdog diagnostics

Fault class: System error

Cause

Measure

Fault detected in STO status during external
watchdog diagnostics.

– Switch the device off and on again.

– Make sure that no external signals are connect-
ed to terminal X6 (STO).

– Make sure that terminal X6 (STO) is not wired
(e.g. jumper plug must be removed).

– If the fault occurs repeatedly, replace the safety
card and send it together with the fault number to
SEW‑EURODRIVE. For further support, contact
SEW‑EURODRIVE Service.

2.12

Fault 63 Speed-dependent drive safety function

Subfault: 63.1

Description: SLS 1 limit speed exceeded in positive direction of movement

Fault class: Warning

Cause

Measure

SLS 1 limit speed exceeded in positive direction
of movement.

– Check the speed setpoint of the application
while the drive safety function is active, and ad-
just if necessary.

– Check the parameter setting of the safety card
(limit speed SLS 1), and adjust if necessary.

Subfault: 63.2

Description: SLS 2 limit speed exceeded in positive direction of movement

Fault class: Warning

Cause

Measure

SLS 2 limit speed exceeded in positive direction
of movement.

– Check the speed setpoint of the application
while the drive safety function is active, and ad-
just if necessary.

– Check the parameter setting of the safety card
(limit speed SLS 2), and adjust if necessary.

27799182/EN – 10/2022

Summary of Contents for MOVI-C MOVISAFE CS A Series





































































































Search results

Summary of Contents for MOVI-C MOVISAFE CS A Series

Reviews:

Related manuals for MOVI-C MOVISAFE CS A Series

Brands by name

Popular brands

SEW-Eurodrive MOVI-C MOVISAFE CS A Series, Manual

Search results

Summary of Contents for MOVI-C MOVISAFE CS A Series

Reviews:

Related manuals for MOVI-C MOVISAFE CS A Series

Brands by name

Popular brands