SEW-Eurodrive MOVI-C MOVISAFE CS A Series Manual Download Page 77

Page: 77 / 100

Fault list – safety technology

Fault 66 Safety-related fault

Manual – Fault Descriptions MOVISAFE

CS..A

Subfault: 66.152

Description: Different firmware signatures

Response: FS – log

Cause

Measure

The saved signatures do not match.

Enter the signatures again.

Subfault: 66.160

Description: Faulty data (master password) from data memory

Fault class: Message

Cause

Measure

Failed to read master password from data
memory.

For information only.

Subfault: 66.168

Description: Parameter set recovery performed

Response: FS – log

Cause

Measure

The parameter set has been restored.

For information only.

Subfault: 66.169

Description: Delivery state restored

Response: FS – log

Cause

Measure

The delivery state has been restored.

For information only.

Subfault: 66.170

Description: Parameter setting completed

Fault class: Log

Cause

Measure

Parameters have been set.

For information only.

Subfault: 66.171

Description: Report created

Fault class: Log

Cause

Measure

The report has been created.

For information only.

Subfault: 66.172

Description: Acceptance confirmed

Fault class: Log

Cause

Measure

Acceptance confirmed.

For information only.

27799182/EN – 10/2022

Summary of Contents for MOVI-C MOVISAFE CS A Series





































































































Search results

Summary of Contents for MOVI-C MOVISAFE CS A Series

Reviews:

Related manuals for MOVI-C MOVISAFE CS A Series

Brands by name

Popular brands

SEW-Eurodrive MOVI-C MOVISAFE CS A Series, Manual

Search results

Summary of Contents for MOVI-C MOVISAFE CS A Series

Reviews:

Related manuals for MOVI-C MOVISAFE CS A Series

Brands by name

Popular brands